Modular/DIN Rail Timers

Intermatic T30401R Pool/Spa Control Panel T104M/T101M

24Hr Programmable 1or2-Spd Seasonality Timer Mechanism with Additional Aux Circuit

The Intermatic P1261P is a portable twocircuit fountain timer. This model includes a plugin for a pool pump (for a timed circuit) and a plugin for a pool light (for a live circuit). The timer also comes with a builtin threeprong grounded plug with GFCI protected circuits for the time switch supply.

These portable two-circuit fountain timers incorporate a plug in for a timed circuit (normally used for a pool pump) and a plug-in for a live circuit (typically used for a pool light). GFCI protected circuits and a three-prong grounded plug for the time switch supply are also built-in.

Beige finish - All plastic NEMA 3R rated for Indoor/Outdoor installation - Can be used with the Intermatic P1000 and P7000 Series - 93/8-Inch (23.9 cm) Height by51/2-Inch (14.0 cm) Width by 35/8-Inch (9.2 cm) Diameter - Combination 1/2-Inch - 3/4-Inch nominal knockouts, 1 on back and each side of enclosure, and 2 on bottom

The Intermatic PE30065RCT3 is a kit for pool use. It comes with an outdoor enclosure with dimensions of 16.5 x 10 x 4.75 inches. It comes with the PE653RC MultiWave ZWave wireless control system, an 80Amp breaker base, and a 300watt transformer.

The Intermatic PE30065RC is a 80 Amp, type 3R load center with the PE653RC MultiWave radio control for pool and spa control systems. This model contains all the necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system. Get the Intermatic PE30065RC with included radio control and make it a fully operative system.

Includes one P1353ME mechanism - Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system - 48/1000-Inch steel with electrostatically applied light beige finish enclosure - 60-Amps, 120, 240 VAC or 120, 208 VAC single phase

Includes one P1353ME mechanism;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

The Intermatic PE20065RC is a 60 Amp pool and spa control system with type 3R load center. This model contains all the necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system. Get the Intermatic PE20065RC with included radio control and make it a fully operative system.

Thermostat only 120/240 VAC installation, 1.5/3 HP - Used to protect pool and spa equipment and plumbing against freeze damage - They turn the pump and heater ON when the outdoor temperature drops below the temperature set by the user-adjustable thermostat - 34/1000-Inch drawn steel, electrostatically coated, beige color enclosure

The Intermatic PF1102 is a onecircuit freeze protection control that includes a thermostat in type 3R steel enclosure for 240V installations. This control is created for protection of pool and spa equipment against freezing. When temperature drops below the thermostat set one, which is useradjustable, the control turns On the pump with the heater. You can also easily connect the model to a timer or switching device to both control and freezeprotect your equipment.

Water-resistant backlit display shows time of day, equipment status and water and air temperature - Programs and displays all on/off schedules, thermostat settings, time of day and variable pump speeds - Internal memory backup retains communication link during power outages - Ability to copy programming to additional remote controls - Uses three AA batteries (included)

Controls variable speed pumps and two-speed pumps - Included wireless transmitter allows you to control your pool or spa while relaxing in your backyard - Control 5 generic loads for single and two-speed filter pumps, cleaner pumps, pool lights, spa lights, landscape lights, fountains and water features - Enclosure for use as wiring compartment - For 120 or 240 Volt applications

This inerratic 3 circuit switch is for 1 and 2 speed pumps. It can control up to 3 circuit and 3 ON/OFF events per day. There are 7 pre-programmed combinations to choose from.

For 1 and 2-speed pumps;Controls 3 circuits;3 ON/OFF events per day;7 pre-programmed combinations to choose from;Add on other pool/spa related devices

Controls a total of three timed circuits, including single speed or two-speed filter pumps, pool lights, spa lights and landscape lights;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

Controls a total of three timed circuits, including single speed or two-speed filter pumps, pool lights, spa lights and landscape lights;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

The Intermatic valve actuator control is an affordable control that would only automate a set of water valves from the pool position to the spa position. It can turn a single water valve to engage a water feature. Easily snap into most existing Intermatic enclosures with available mechanism support bracket. Controls up to three valve actuators. Switches heater and thermostat HIGH/LOW and features remote control capabilities.