Modular/DIN Rail Timers

Controls a total of three timed circuits, including single speed or two-speed filter pumps, pool lights, spa lights and landscape lights;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

Controls up to 5 loads - 100 amp circuit breaker bus - 120VAC and 240 VAC capabilities - System displays status of each of the 4 on-demand circuits and pool/spa water temperature - Approved for direct connect of lights

The Intermatic PE14065RC is a kit for pool use. It comes with an outdoor enclosure with dimensions of 14.75 x 14.75 x 4.25 inches. It comes with the PE653RC MultiWave ZWave wireless control system, a valve actuator control, and two compatible 24volt pool/spa water valve actuators.

The Intermatic valve actuator control is an affordable control that would only automate a set of water valves from the pool position to the spa position. It can turn a single water valve to engage a water feature. Easily snap into most existing Intermatic enclosures with available mechanism support bracket. Controls up to three valve actuators. Switches heater and thermostat HIGH/LOW and features remote control capabilities.

ONE P1403ME IN 9.375 X 5.5 X 3.625 IN. STEEL OUTDOOR ENCLOSURE

ONE EMPTY 14 3/4 X 14 3/4 X 4.25 IN. PE OUTDOOR ENCLOSURE

The Intermatic PC1120 is a onechannel light controller with a single channel switch from the LightMaster PC series. Based on the amount of natural light in an area, this lighting control system is designed to control one or two circuits independently.

Automated control for pumps, cleaners, and other types of loads 3 different mounting methods Quick connect terminals for easy installation

INTERMATIC PB914N66 SPST 24-HOUR 240 VAC MECHANICAL PANEL MOUNT TIMERS For PF SERIES PANEL MOUNT PB914N66 These timers provide automatic control for pumps, cleaners and other types of loads. Timers have three-way mounting; flush in round opening, raised in rectangular opening or on base. Quick connect terminals for easy installation.

The Intermatic WP3103C is a singlegang, weatherproof receptacle cover. This vertical/horizontal cover is easy to install, as it already comes with base cover assembly, gasket, mounting screws and patented inserts. This clear receptacle cover is ideal for schools and commercial buildings. It is intended to be used for both vertical and horizontal outdoor outlets which are situated in a wet location. This clear cover fits over any wall outlet or switch. The connection is protected from weather by its preadhered neoprene gasket. The cover provides usable inside depth of 2 3/4".

The Intermatic WP1110WC is a singlegang, plastic, weatherproof cover in white. This model is easy to install. It comes with base cover assembly, gasket, and mounting screws. Also, for serve applications like commercial buildings and schools, the cover has patented inserts. The Intermatic WP1110WC has a durable, heavyduty polycarbonate construction and can be mounted vertically or horizontally.

The WP1110GC plastic in-use covers are easy to install and shipped with gasket, mounting screws, base cover assembly, and patented inserts for serve applications, such as schools and commercial buildings. Single-gang covers mount vertically and horizontally.

The Intermatic WP1100WC is a single-gang, weatherproof receptacle cover. This vertical/horizontal cover is easy to install, as it already comes with base cover assembly, gasket, mounting screws and patented inserts. This white receptacle cover is ideal for schools and commercial buildings. It is intended to be used for both vertical and horizontal outdoor outlets which are situated in a wet location. This white cover fits over any wall outlet or switch. The connection is protected from weather by its preadhered neoprene gasket. The cover provides usable inside depth of 2 3/4".

Single Gang Vertical or Horiz. 2-3/4" Deep w/ (WP17) Inserts Flexi Guard - Clear

This WP3110MXD (AKA Slim) is simple to use and easy to install. It meets/exceeds 2011 NEC code requirements for "Extra Duty" applications along with wet locations. Re-inforced hinge design meets the challenge of commercial use. High impact rating allows cover to take a beating from today's environment and remain intact.

This WP1250MXD (AKA Big Papa) is simple to use and easy to install. It meets/exceeds 2011 NEC code requirements for "Extra Duty" applications along with wet locations. Re-inforced hinge design meets the challenge of commercial use. High impact rating allows cover to take a beating from today's environment and remain intact.

This WP1250MVXD (AKA Chubs) is simple to use and easy to install. It meets/exceeds 2011 NEC code requirements for "Extra Duty" applications along with wet locations. Re-inforced hinge design meets the challenge of commercial use. High impact rating allows cover to take a beating from today's environment and remain intact.

This WP1030MXD (AKA Norm) is simple to use and easy to install. It meets/exceeds 2011 NEC code requirements for "Extra Duty" applications along with wet locations. Re-inforced hinge design meets the challenge of commercial use. High impact rating allows cover to take a beating from today's environment and remain intact.

This WP1010MXD (AKA Boss) is simple to use and easy to install. It meets/exceeds 2011 NEC code requirements for "Extra Duty" applications along with wet locations. Re-inforced hinge design meets the challenge of commercial use. High impact rating allows cover to take a beating from today's environment and remain intact.