MIL72 Series

Valve/Pump Switch Mechanism

Used to control up to three valve actuators and two additional 120 VAC or 240 VAC loads - Can be used with the Intermatic PE650 - Can be used with the Intermatic PE953 - Automatic HIGH/LOW water temperature selector - Has connections for a hard wired or wireless remote and a master switch controller

Easily snap into most existing Inerratic enclosures with available mechanism support bracket - Controls up to three valve actuators - Switches heater and thermostat HIGH/LOW - Remote control capabilities - Mechanism only, type 3R enclosure not included

24Hr Programmable 1or2-Spd Seasonality Timer Mechanism with Additional Aux Circuit

The Intermatic P1261P is a portable twocircuit fountain timer. This model includes a plugin for a pool pump (for a timed circuit) and a plugin for a pool light (for a live circuit). The timer also comes with a builtin threeprong grounded plug with GFCI protected circuits for the time switch supply.

These portable two-circuit fountain timers incorporate a plug in for a timed circuit (normally used for a pool pump) and a plug-in for a live circuit (typically used for a pool light). GFCI protected circuits and a three-prong grounded plug for the time switch supply are also built-in.

The P1131 portable outdoor pool timer is specially designed to control the filter pump of a portable or above-ground pool or spa, but it can also be used to turn on and off (in off-season) outdoor decoration, engine block heaters, and other appliances--indoors or outdoors. For applications up to 15 amps. Comes with twist-lock plug and receptacle.

24 Hour, 120-Volt AC - Specially suited for applications where equipment needs to be cycled ON and OFF up to 8 times per day - Rugged construction, resistance to surges and humidity, operate between wide temperature extremes - A light indicator illuminates when the timer is in the ON position - Select feature allows timers to be continuously ON, OFF or in AUTO mode

Intermatic 178T24 THERMOSTAT FOR FP1102T/PF1103T

Water-resistant backlit display shows time of day, equipment status and water and air temperature - Programs and displays all on/off schedules, thermostat settings, time of day and variable pump speeds - Internal memory backup retains communication link during power outages - Ability to copy programming to additional remote controls - Uses three AA batteries (included)

Controls variable speed pumps and two-speed pumps - Included wireless transmitter allows you to control your pool or spa while relaxing in your backyard - Control 5 generic loads for single and two-speed filter pumps, cleaner pumps, pool lights, spa lights, landscape lights, fountains and water features - Enclosure for use as wiring compartment - For 120 or 240 Volt applications

Can be used with Intermatic PE953, P1353ME, P4243ME, P4043ME - Used to control gas or electric heater thermostat - Parts can be added or replaced without interfering with the original system - Modules are capable of working within a system or independently - Receiver, antenna and instructions included

Includes one P1353ME mechanism - Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system - 48/1000-Inch steel with electrostatically applied light beige finish enclosure - 26-Inch (66.3 cm) Height by 18-Inch (45.9 cm) Width by 5-1/2-Inch (14.0 cm) Diameter - 125-Amps, 120, 240 VAC or 120, 208 VAC single phase

The Intermatic PE40000 is a 125 Amp control system with type 3R load center. This model contains all necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system.

Includes one P1353ME mechanism;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

The Intermatic PE34065RCT3 is a kit for pool use. It comes with an outdoor enclosure with dimensions of 16.5 x 10 x 4.75 inches. It comes with the PE653RC MultiWave ZWave wireless control system, an 80Amp breaker base, and a 300watt transformer. This Intermatic kit also comes with a valve actuator control and two compatible 24volt pool/spa water valve actuators.

OUTDOOR ENCLOSURE WITH 80 AMP BUS & PE653RC RADIO CONTROL (MULTIWAVE)

The Intermatic PE30065RCT3 is a kit for pool use. It comes with an outdoor enclosure with dimensions of 16.5 x 10 x 4.75 inches. It comes with the PE653RC MultiWave ZWave wireless control system, an 80Amp breaker base, and a 300watt transformer.

The Intermatic PE30065RC is a 80 Amp, type 3R load center with the PE653RC MultiWave radio control for pool and spa control systems. This model contains all the necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system. Get the Intermatic PE30065RC with included radio control and make it a fully operative system.