Electronic Time Switches

* Astronomic feature provides sunset ON and sunrise OFF settings to eliminate the need for separate photo control devices.

ET8000 Series automatically switches loads according to a preset weekly schedule with to-the-minute accuracy.The independent 7-day programming provides complete flexibility for applications where load switching differs each day of the week. Astronomic programming can be combined with independent programs to provide a sunset ON and timed OFF program.

Permits Different Operation Each Day.

Upgrading to an electronic time switch has never been easier with the new Intermatic ET1700 Series 7-day electronic time switch. The timer features pulsed contact, an automatic daylight saving time adjustment, multi-volt operation from 120 to 277 VAC, and to-the-minute programming for accurate load control and reduced energy costs. Up to 28 set points or events (14 ON/14 OFF per channel) can be distributed throughout the days of the week and the program can be overridden at any time. Two industrial grade AAA Alkaline batteries provide 3 years minimum program and timing protection.

Permits Different Operation Each Day.

Upgrading to an electronic time switch has never been easier with the new Intermatic ET1700 Series 7-day electronic time switch. The timer features pulsed contact, an automatic daylight saving time adjustment, multi-volt operation from 120 to 277 VAC, and to-the-minute programming for accurate load control and reduced energy costs. Up to 28 set points or events (14 ON/14 OFF per channel) can be distributed throughout the days of the week and the program can be overridden at any time. Two industrial grade AAA Alkaline batteries provide 3 years minimum program and timing protection.

* ET1725 Models feature contacts that can be field configured to act as two independently operated SPST, one simultaneously operated DPST, or independently pulsed SPST for contactor and bell ringing applications.

* CPD82 Models feature NEMA 3R high impact polycarbonate plastic enclosure with clear cover for easy viewing of time switch mode and current status.

*This is an obsolete model, the suggested replacement is ET2725CP.

https://www.bulbspro.com/et2725cp.html

* Astronomic feature provides sunset ON and sunrise OFF settings to eliminate the need for separate photo control devices.

ET8000 Series automatically switches loads according to a preset weekly schedule with to-the-minute accuracy.The independent 7-day programming provides complete flexibility for applications where load switching differs each day of the week. Astronomic programming can be combined with independent programs to provide a sunset ON and timed OFF program.

Permits Different Operation Each Day.

Upgrading to an electronic time switch has never been easier with the new Intermatic ET1700 Series 7-day electronic time switch. The timer features pulsed contact, an automatic daylight saving time adjustment, multi-volt operation from 120 to 277 VAC, and to-the-minute programming for accurate load control and reduced energy costs. Up to 28 set points or events (14 ON/14 OFF per channel) can be distributed throughout the days of the week and the program can be overridden at any time. Two industrial grade AAA Alkaline batteries provide 3 years minimum program and timing protection.

*This is an obsolete model and could be replaced by ET2715CP.

https://www.bulbspro.com/et2715cp.html

The ETCB28253PCR Electronic All-Purpose Contractor Box provides an easy-to-install solution for a variety of application needs. The Contractor Box comes with a pre-installed Astronomic timer with 7-day, holiday/exception period scheduling, USB for Schedule transfer and Backup, a 3 pole 60 A contactor, as well as inputs for overrides and surge protective devices.

Wiring connections:  "A" Models: screw terminals for #10 to #24 AWG wire;  "E" Models: 1/4 in. quick connector

This timer module offers versatile programming for either 24-hour or 7-day applications. It has heavy duty relay contacts for switching low or line voltage loads. The timer features large keys with a unique, circular pattern for easy programming, an easy-to-read LCD display, and capacitor backup to retain program memory during power outages. The timer also features a clear, snap-on dust cover.

Wiring connections:  "A" Models: screw terminals for #10 to #24 AWG wire;  "E" Models: 1/4 in. quick connector

This timer module offers versatile programming for either 24-hour or 7-day applications. It has heavy duty relay contacts for switching low or line voltage loads. The timer features large keys with a unique, circular pattern for easy programming, an easy-to-read LCD display, and capacitor backup to retain program memory during power outages. The timer also features a clear, snap-on dust cover.

Wiring connections:  "A" Models: screw terminals for #10 to #24 AWG wire;  "E" Models: 1/4 in. quick connector

This timer module offers versatile programming for either 24-hour or 7-day applications. It has heavy duty relay contacts for switching low or line voltage loads. The timer features large keys with a unique, circular pattern for easy programming, an easy-to-read LCD display, and capacitor backup to retain program memory during power outages. The timer also features a clear, snap-on dust cover.

Same Operation Each Day

Upgrading to an electronic time switch has never been easier with the new Intermatic ET1100 Series. This Series replace Intermatic popular ET100 Series.These time switches provide dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 28 setpoints or events can be preset to automatically repeat. The program can be disabled at any time by placing the time switch in the Manual operating mode. Control buttons provide manual control of each circuit independently, regardless of the operating mode. All models come with two industrial-grade AAA alkaline batteries to provide time keeping and automatic carryover for a minimum of 3 years. 

* ET1125 Models feature contacts that can be field configured to act as two independently operated SPST, one simultaneously operated DPST, or independently pulsed SPST for contactor and bell ringing applications.

* This is an obsolete model, could be replaced with ET2125CR.

For electric heat, hot gas or compressor shutdown defrost. The DTAV40 Series Auto Voltage Defrost Timer is applicable to air defrost (compressor shutdown) and electric or hot gas defrost systems where the defrost cycle is terminated by the timer. If the coil is frost-free, the timer can also be terminated by temperature or pressure switches before the programmed defrost termination time has been reached. The time termination functions as a fail-safe and terminates the defrost cycle if the temperature or pressure switch fails to do so.

For electric heat, hot gas or compressor shutdown defrost. The DTAV40 Series Auto Voltage Defrost Timer is applicable to air defrost (compressor shutdown) and electric or hot gas defrost systems where the defrost cycle is terminated by the timer. If the coil is frost-free, the timer can also be terminated by temperature or pressure switches before the programmed defrost termination time has been reached. The time termination functions as a fail-safe and terminates the defrost cycle if the temperature or pressure switch fails to do so.

This timer module offers versatile programming for either 24-hour or 7-day applications. It has heavy duty relay contacts for switching low or line voltage loads. The timer features large keys with a unique, circular pattern for easy programming, an easy-to-read LCD display, and capacitor backup to retain program memory during power outages. The timer also features a clear, snap-on dust cover.

Wiring connections:  "A" Models: screw terminals for #10 to #24 AWG wire;  "E" Models: 1/4 in. quick connector

This timer module offers versatile programming for either 24-hour or 7-day applications. It has heavy duty relay contacts for switching low or line voltage loads. The timer features large keys with a unique, circular pattern for easy programming, an easy-to-read LCD display, and capacitor backup to retain program memory during power outages. The timer also features a clear, snap-on dust cover.

Wiring connections:  "A" Models: screw terminals for #10 to #24 AWG wire;  "E" Models: 1/4 in. quick connector

This timer module offers versatile programming for either 24-hour or 7-day applications. It has heavy duty relay contacts for switching low or line voltage loads. The timer features large keys with a unique, circular pattern for easy programming, an easy-to-read LCD display, and capacitor backup to retain program memory during power outages. The timer also features a clear, snap-on dust cover.

This timer module offers versatile programming for either 24-hour or 7-day applications. It has heavy duty relay contacts for switching low or line voltage loads. The timer features large keys with a unique, circular pattern for easy programming, an easy-to-read LCD display, and capacitor backup to retain program memory during power outages. The timer also features a clear, snap-on dust cover.

This timer module offers versatile programming for either 24-hour or 7-day applications. It has heavy duty relay contacts for switching low or line voltage loads. The timer features large keys with a unique, circular pattern for easy programming, an easy-to-read LCD display, and capacitor backup to retain program memory during power outages. The timer also features a clear, snap-on dust cover.

* This item has been discontinued and is replaced by its newer version FM1D50-LV. Please refer to the attached specification sheet for details

This timer module offers versatile programming for either 24-hour or 7-day applications. It has heavy duty relay contacts for switching low or line voltage loads. The timer features large keys with a unique, circular pattern for easy programming, an easy-to-read LCD display, and capacitor backup to retain program memory during power outages. The timer also features a clear, snap-on dust cover.

* This model has been discontinued and replaced with FM1D20A-240 which is surface/din rail mount.

The GM40AVE-RD89 is a universal, electronic time switch designed for general purpose residential and commercial applications. The robust 40 A time control automatically detects the input voltage without the use of a DIP switch or selector pins. The time switch automatically selects any voltage between 120 VAC and 277 VAC. The mechanism is mounted in a compact UL Type 3R outdoor enclosure and can also be easily retrofitted into other Intermatic enclosure types. The time control features a DPDT switching configuration standard (i.e. two normally open and two normally closed contacts).