Time Switch Enclosures & Panels

Includes one P1353ME mechanism - Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system - 48/1000-Inch steel with electrostatically applied light beige finish enclosure - 26-Inch (66.3 cm) Height by 18-Inch (45.9 cm) Width by 5-1/2-Inch (14.0 cm) Diameter - 125-Amps, 120, 240 VAC or 120, 208 VAC single phase

The Intermatic PE30065RC is a 80 Amp, type 3R load center with the PE653RC MultiWave radio control for pool and spa control systems. This model contains all the necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system. Get the Intermatic PE30065RC with included radio control and make it a fully operative system.

Controls up to 5 loads - 100 amp circuit breaker bus - 120VAC and 240 VAC capabilities - System displays status of each of the 4 on-demand circuits and pool/spa water temperature - Approved for direct connect of lights

ONE EMPTY 14 3/4 X 14 3/4 X 4.25 IN. PE OUTDOOR ENCLOSURE

16 1/2 in. (H) x 10 7/8 in. (W) x 4 1/4 in. (D). 15.5 lbs. This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.

16 3/4 in. (H) x 8 7/8 in. (W) x 4 3/8 in. (D). 11 lbs. This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.

The Intermatic PE30065RC is a 80 Amp, type 3R load center with the PE653RC MultiWave radio control for pool and spa control systems. This model contains all the necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system. Get the Intermatic PE30065RC with included radio control and make it a fully operative system.

Replace Intermatic 2T2089GA. 10 1/2 in. (H) x 10 1/2 in. (W) x 4 in. (D). 6.5 lbs. This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.

The Intermatic PE14065RC is a kit for pool use. It comes with an outdoor enclosure with dimensions of 14.75 x 14.75 x 4.25 inches. It comes with the PE653RC MultiWave ZWave wireless control system, a valve actuator control, and two compatible 24volt pool/spa water valve actuators.

Controls up to 5 loads - 100 amp circuit breaker bus - 120VAC and 240 VAC capabilities - System displays status of each of the 4 on-demand circuits and pool/spa water temperature - Approved for direct connect of lights

Controls a total of three timed circuits, including single speed or two-speed filter pumps, pool lights, spa lights and landscape lights;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

Controls a total of three timed circuits, including single speed or two-speed filter pumps, pool lights, spa lights and landscape lights;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

20 3/4 in. (H) x 12 3/4 in. (W) x 4 1/4 in. (D). 16 lbs. This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.

20 3/4 in. (H) x 12 3/4 in. (W) x 4 1/4 in. (D). 19.4 lbs. This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms. *** Pool/Spa Equipment Controls.

Ideal for applications located in high humidity and dust environments. 9 3/8 in. (H) x 5 1/2 in. (W) x 3 3/4 in. (D), 1.3 lbs. *** Available for SERIES T100, T170, T180, T1100, T1200, T1400, T1900, T2000, C8800, ET100C, ET170C, ET700C and models EH10, EH40, ET279C ET70115, ET70215, and ET8000 series.

Ideal for applications located in high humidity and dust environments. 9 3/8 in. (H) x 5 1/2 in. (W) x 3 3/4 in. (D), 1.3 lbs. *** Available for SERIES T100, T170, T180, T1100, T1200, T1400, T1900, T2000, C8800, ET100C, ET170C, ET700C and models EH10, EH40, ET279C ET70115, ET70215, and ET8000 series.

8.795 in. H x 6.631 in. W x 2.935 in. D. Provisions for mounting Intermatic timer modules. Five combinations 1 ⁄2 – 3 ⁄4 in. knockouts: in bottom, sides and back

Ideal for applications located in high humidity and dust environments. 9 3/8 in. (H) x 5 1/2 in. (W) x 3 3/4 in. (D), 1.3 lbs. *** Available for SERIES T100, T170, T180, T1100, T1200, T1400, T1900, T2000, C8800, ET100C, ET170C, ET700C and models EH10, EH40, ET279C ET70115, ET70215, and ET8000 series.

12 1/2 in. (H) x 8 1/4 in. (W) x 3 7/8 in. (D), 4 lbs. Available for SERIES T7400B, T7800B, T7400BC and T7800BC.