Wiring Devices

• Used as primary insulation for wire and cable splices up to 600 volts
• Used for wire harnessing, jacketing on high voltage splices
• Superior adhesion and elasticity
• Highly resistant to UV, abrasion and corrosion, flame-retardant

WW-HR is an ethylene rubber based high voltage tape with excellent electrical, chemical and physical properties. WW-HR is a linerless, self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-HR is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-RSL is a 30 mil (0.76mm) self-amalgamating, low voltage rubber tape which is UL-510 Listed for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. WW-RSL is compatible with all extruded dielectric cable insulations. Meet ASTM D-4388 type I standard.

WW-RS is a general-purpose ethylene rubber based tape with excellent electrical. WW-RS is a self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-RS is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-RS is a general-purpose ethylene rubber based tape with excellent electrical. WW-RS is a self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-RS is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

High quality PVC Electrical Tape is CSA approved/UL listed. Suitable for use attemperatures between -10°C & 80°C, and applications of up to 600 Volts.

WW-HRL is a 30 mil (0.76mm) ethylene propylene rubber, self-amalgamating high voltage tape for insulating and jacketing splices though 69kV. WW-HRL amalgamates quickly, yielding a void-free, electrically stable build-up and is ideal for waterproofing.

Self fusing tape is ideal for virtually any application that requires a water‑proof seal and is an excellent insulator with high dielectric strength. Applications include: Marine connections, battery terminals, automotive hoses, colour coding, cable splices and tool grip enhancement.

WW-HW Harness Wrap Tape is vinyl backed, 5 mil tape. WW-HW adhesion strength allows for exceptional harnessing and bundling of cables. It is best used in the creation of wire harnesses and other applications that require the securing of cables or wires.

List price is for whole pack of 10 pieces.

WW-RMR is a self-bonding mastic tape consisting of an ethylene propylene rubber (EPR) backing, bonded to a tacky temperature stable, electrical grade mastic. Use for insulating and moisture sealing splices and terminations on solid dielectric cable. Provides excellent electrical properties, superior adhesion, moisture and chemical resistance. For primary insulation up to 2kV.

An ethylene rubber based, high voltage tape possessing excellent electrical, chemical and physical properties. Use linerless, self-bonding tapes when insulating and jacketing splices on power cable from 600 volts to 69,000 volts. Allows quicker taping speeds than liner tape and yields a uniform, void-free build-up while contouring unusual shapes.

• Used as primary insulation for wire and cable splices up to 600 volts
• Used for wire harnessing, jacketing on high voltage splices
• Superior adhesion and elasticity, excellent tensile strength
• Highly resistant to UV, abrasion and corrosion, flame-retardant

WW-EF is a 0.125in. (3.2mm) self-amalgamating mastic for insulating and sealing all types of overhead and direct buried electrical connections up to 600 volts. WWEF has superior adhesion to metals, cable insulations and jackets. It will have no adverse effects on polymeric conducting shields. WW-EF is normally wrapped with vinyl tape.

WW-RSL is a 30 mil (0.76mm) self-amalgamating, low voltage rubber tape which is UL-510 Listed for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. WW-RSL is compatible with all extruded dielectric cable insulations. Meet ASTM D-4388 type I standard.

Techspan 669972B - Wrap ‘N’ Seal Automotive Tape (Self-Fusing) - 22FT x 0.750" x 0.030" - Black - 50 Rolls/Carton

Techspan 769999B - PVC Electrical Tape - 60' x 3/4" x 0.007" - Black - 100 Rolls/Sleeve