Wiring Devices
-
Leviton L7986-100 - Support, Service Drop Grip, Single Eye Service Drop Grip, 0.82-1.00" Galv- Breakload is 1,900 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...$45.25 -
Leviton L8812-100 - Support, Bus Drop Grip, 0.41-0.56" Galv- Breakload is 1000 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...$48.35 -
Leviton L9638-100 - Support, Single Eye Split Mesh Rod Closing Cable Support Grip, 2.00-2.50", 304 Stainless Steel- Breakload is 3,400 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...$188.42 -
Leviton L8713-100 - Pulling, Lace Up Cable Grip, 0.75-1.00", Galv- Breakload is 5,600 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Pulling grips are reusable devices for pulling bare conductors, insulated wires, synthetic rope, wire rope, and fiber optic cable
All pulling grip designs are fully tested to meet published break ratings without slipping
Learn More...$117.23 -
Leviton L8002-100 - Strain Relief, I-Grip Connector, 0.40–0.56" (10.16–14.22MM)
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Strain relief grips are used to connect cable or flexible conduit to electrical enclosures and equipment and resist pull out
These grips reduce pulling tension, flexing, twisting, and bending that can cause system damage
Learn More...$85.49 -
Leviton L9653-100 - Support, Double Eye Split Mesh Rod Closing Cable Support Grip, 0.75-1.00", 304 Stainless Steel- Breakload is 1,020 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...$101.66 -
Leviton L8504-100 - Pulling, Junior Pulling Grip, Flex Eye, 0.75-0.99" - Breakload is 2,800 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Pulling grips are reusable devices for pulling bare conductors, insulated wires, synthetic rope, wire rope, and fiber optic cable
All pulling grip designs are fully tested to meet published break ratings without slipping
Learn More...$91.74 -
Leviton L7726-100 - Strain Relief, Deluxe Cord Grip, 1.25" NPT Straight Male 1.13- 1.25" (28.7-31.8MM)
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Strain relief grips are used to connect cable or flexible conduit to electrical enclosures and equipment and resist pull out
These grips reduce pulling tension, flexing, twisting, and bending that can cause system damage
Learn More...$238.11 -
Leviton L8513-100 - Pulling, Single Eye Cable Grip, Light Duty Single Eye, 0.75-1.00", Galv- Breakload is 5,600 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Pulling grips are reusable devices for pulling bare conductors, insulated wires, synthetic rope, wire rope, and fiber optic cable
All pulling grip designs are fully tested to meet published break ratings without slipping
Learn More...$125.81 -
Leviton L7725-100 - Strain Relief, Deluxe Cord Grip, 1.25" NPT Straight Male 1.00- 1.13" (25.4-28.7MM)
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Strain relief grips are used to connect cable or flexible conduit to electrical enclosures and equipment and resist pull out
These grips reduce pulling tension, flexing, twisting, and bending that can cause system damage
Learn More...$238.11 -
Leviton L9639-100 - Support, Single Eye Split Mesh Rod Closing Cable Support Grip, 2.50-3.00", 304 Stainless Steel- Breakload is 3,400 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...$212.61 -
Leviton L8718-100 - Pulling, Lace Up Cable Grip, 2.00-2.50", Galv- Breakload is 11,200 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Pulling grips are reusable devices for pulling bare conductors, insulated wires, synthetic rope, wire rope, and fiber optic cable
All pulling grip designs are fully tested to meet published break ratings without slipping
Learn More...$180.64 -
Leviton L9508-100 - Support, Single Eye Closed Mesh Cable Support Grip, 2.00-2.50", 304 Stainless Steel - Breakload is 3,400 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...$163.74 -
Leviton L8721-100 - Pulling, Lace Up Cable Grip, 2.50-3.50", Galv- Breakload is 13,440 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Pulling grips are reusable devices for pulling bare conductors, insulated wires, synthetic rope, wire rope, and fiber optic cable
All pulling grip designs are fully tested to meet published break ratings without slipping
Learn More...$241.73 -
Leviton L9654-100 - Support, Double Eye Split Mesh Rod Closing Cable Support Grip, 1.00-1.25", 304 Stainless Steel- Breakload is 1,610 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...$101.66 -
Leviton L8714-100 - Pulling, Lace Up Cable Grip, 1.00-1.50", Galv- Breakload is 7,840 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Pulling grips are reusable devices for pulling bare conductors, insulated wires, synthetic rope, wire rope, and fiber optic cable
All pulling grip designs are fully tested to meet published break ratings without slipping
Learn More...$128.40 -
Leviton L7754-100 - Strain Relief, Deluxe Cord Grip, 3" NPT Straight Male 2.81-3.00" (71.4-76.2MM)
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Strain relief grips are used to connect cable or flexible conduit to electrical enclosures and equipment and resist pull out
These grips reduce pulling tension, flexing, twisting, and bending that can cause system damage
Learn More...$1,046.24 -
Leviton L9737-100 - Support, Heavy Duty Double Eye Split Lace Support Grip, 3.00- 3.50- Breakload is 13,420 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...$665.42 -
Leviton L9656-100 - Support, Double Eye Split Mesh Rod Closing Cable Support Grip, 1.50-1.75", 304 Stainless Steel- Breakload is 1,610 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh application
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...$127.10 -
Leviton L9714-100 - Support, 1.75-2.00" Breakload is 4490 LB 5000 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...$272.93