Wiring Devices

Techspan 669653 - Cold Weather Electrical Tape - 600 Volt Rating - 66' Length - ‘ICE’ Blue - 1 Roll

Techspan 669657 - Cold Weather Electrical Tape - 600 Volt Rating - 66' Length - Black - 1 Roll

Techspan 769650 - Cold Weather Tape Display - 25 Black/25 Ice-Blue

• 600 Volt rating
• Flame Retardant
• Weather-Resistant
• Can be used as primary insulation at not more than 600 Volts
• Lead-free • Temperature rating: -18°C to 105°C (0°F to 221°F)
• Easily applied at low temperatures • Highly elastic
• Dimensions (Length x Width x Thickness): 20m x 19mm x .18mm (66' x 3/4" x .007")
• CSA Approved/UL Listed

• 600 Volt rating
• Flame Retardant
• Weather-Resistant
• Can be used as primary insulation at not more than 600 Volts
• Lead-free • Temperature rating: -18°C to 105°C (0°F to 221°F)
• Easily applied at low temperatures • Highly elastic
• Dimensions (Length x Width x Thickness): 20m x 19mm x .18mm (66' x 3/4" x .007")
• CSA Approved/UL Listed

WW-RS is a general-purpose ethylene rubber based tape with excellent electrical. WW-RS is a self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-RS is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-RS is a general-purpose ethylene rubber based tape with excellent electrical. WW-RS is a self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-RS is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-MSR is a 125 mil (3.2mm) self-amalgamating, insulating mastic for insulating and sealing all types of overhead and direct buried electrical connections up to 600 volts. For water sealing ductwork, cable ends and all types of splices. Normally WW-MSR should be jacketed with vinyl tape.

WW-RS is a general-purpose ethylene rubber based tape with excellent electrical. WW-RS is a self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-RS is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-RS is a general-purpose ethylene rubber based tape with excellent electrical. WW-RS is a self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-RS is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-GC is a woven glass fabric tape with a thermosetting rubber based pressure-sensitive adhesive. It has high tensile strength, and provides excellent tear and abrasion resistance with a service temperature rating of 266 ºF.

WW-GC is a woven glass fabric tape with a thermosetting rubber based pressure-sensitive adhesive. It has high tensile strength, and provides excellent tear and abrasion resistance with a service temperature rating of 266 ºF.

WW-RSL is a 30 mil (0.76mm) self-amalgamating, low voltage rubber tape which is UL-510 Listed for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. WW-RSL is compatible with all extruded dielectric cable insulations. Meet ASTM D-4388 type I standard.

WW-RSL is a 30 mil (0.76mm) self-amalgamating, low voltage rubber tape which is UL-510 Listed for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. WW-RSL is compatible with all extruded dielectric cable insulations. Meet ASTM D-4388 type I standard.

WW-RSL is a 30 mil (0.76mm) self-amalgamating, low voltage rubber tape which is UL-510 Listed for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. WW-RSL is compatible with all extruded dielectric cable insulations. Meet ASTM D-4388 type I standard.

WW-RSL is a 30 mil (0.76mm) self-amalgamating, low voltage rubber tape which is UL-510 Listed for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. WW-RSL is compatible with all extruded dielectric cable insulations. Meet ASTM D-4388 type I standard.

• Good adhesion and elasticity
• All weather performance
• Great tensile strength
• Resistant to UV, abrasion and corrosion
• Flame-retardant

List price is for whole pack of 10 pieces.

• Good adhesion and elasticity
• All weather performance
• Great tensile strength
• Resistant to UV, abrasion and corrosion
• Flame-retardant

List price is for whole pack of 10 pieces.

• Good adhesion and elasticity
• All weather performance
• Great tensile strength
• Resistant to UV, abrasion and corrosion
• Flame-retardant

List price is for whole pack of 10 pieces.