Wire Mesh Safety Grips
-
Leviton L9652-100 - Support, Double Eye Split Mesh Rod Closing Cable Support Grip, 0.63-0.75", 304 Stainless Steel- Breakload is 790 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...
$86.80 -
Leviton L9661-100 - Support, Double Eye Split Mesh Rod Closing Cable Support Grip, 3.00-3.50", 304 Stainless Steel- Breakload is 5,750 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...
$234.96 -
Leviton L9651-100 - Support, Double Eye Split Mesh Rod Closing Cable Support Grip, 0.50-0.62", 304 Stainless Steel- Breakload is 790 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...
$84.22 -
Leviton L8605-100 - Pulling, Rotating Eye Cable Grip, Rotating Eye Double Weave Grip 1.50 - 2.00" - Breakload is 16,400 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Pulling grips are reusable devices for pulling bare conductors, insulated wires, synthetic rope, wire rope, and fiber optic cable
All pulling grip designs are fully tested to meet published break ratings without slipping
Learn More...
$440.59 -
Leviton L7744-100 - Strain Relief, Deluxe Cord Grip, 2.5" NPT Straight Male 2.19- 2.31" (55.5-58.7MM)
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Strain relief grips are used to connect cable or flexible conduit to electrical enclosures and equipment and resist pull out
These grips reduce pulling tension, flexing, twisting, and bending that can cause system damage
Learn More...
$615.17 -
Leviton L9591-100 - Support, Double Eye Split Mesh Lace Closing Cable Support Grip, 1.50-1.75", 304 Stainless Steel- Breakload is 1,6
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...
$105.52 -
Leviton L8555-100 - Pulling, Single Eye Double Weave Cable Grip, 1.50-2.00", GalvBreakload is 16,400 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Pulling grips are reusable devices for pulling bare conductors, insulated wires, synthetic rope, wire rope, and fiber optic cable
All pulling grip designs are fully tested to meet published break ratings without slipping
Learn More...
$282.00 -
Leviton L9659-100 - Support, Double Eye Split Mesh Rod Closing Cable Support Grip, 2.50-3.00", 304 Stainless Steel- Breakload is 3,260 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...
$192.08 -
Leviton L9595-100 - Support, Double Eye Split Mesh Lace Closing Cable Support Grip, 3.00-3.50", 304 Stainless Steel- Breakload is 4,900 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...
$254.69 -
Leviton L8621-100 - Pulling, Rotating Eye Cable Grip, Rotating Eye Multi-Weave Grip 0.25 - 0.50" - Breakload is 7,000 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Pulling grips are reusable devices for pulling bare conductors, insulated wires, synthetic rope, wire rope, and fiber optic cable
All pulling grip designs are fully tested to meet published break ratings without slipping
Learn More...
$337.92 -
Leviton L7704-100 - Strain Relief, Deluxe Cord Grip, 3/8" NPT Straight Male 0.38- 0.50" (9.7-12.7MM)
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Strain relief grips are used to connect cable or flexible conduit to electrical enclosures and equipment and resist pull out
These grips reduce pulling tension, flexing, twisting, and bending that can cause system damage
Learn More...
$103.44 -
Leviton L9656-100 - Support, Double Eye Split Mesh Rod Closing Cable Support Grip, 1.50-1.75", 304 Stainless Steel- Breakload is 1,610 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh application
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...
$127.10 -
Leviton L9737-100 - Support, Heavy Duty Double Eye Split Lace Support Grip, 3.00- 3.50- Breakload is 13,420 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...
$665.42 -
Leviton L7754-100 - Strain Relief, Deluxe Cord Grip, 3" NPT Straight Male 2.81-3.00" (71.4-76.2MM)
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Strain relief grips are used to connect cable or flexible conduit to electrical enclosures and equipment and resist pull out
These grips reduce pulling tension, flexing, twisting, and bending that can cause system damage
Learn More...
$1,046.24 -
Leviton L8714-100 - Pulling, Lace Up Cable Grip, 1.00-1.50", Galv- Breakload is 7,840 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Pulling grips are reusable devices for pulling bare conductors, insulated wires, synthetic rope, wire rope, and fiber optic cable
All pulling grip designs are fully tested to meet published break ratings without slipping
Learn More...
$128.40 -
Leviton L9654-100 - Support, Double Eye Split Mesh Rod Closing Cable Support Grip, 1.00-1.25", 304 Stainless Steel- Breakload is 1,610 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...
$101.66 -
Leviton L8721-100 - Pulling, Lace Up Cable Grip, 2.50-3.50", Galv- Breakload is 13,440 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Pulling grips are reusable devices for pulling bare conductors, insulated wires, synthetic rope, wire rope, and fiber optic cable
All pulling grip designs are fully tested to meet published break ratings without slipping
Learn More...
$241.73 -
Leviton L9508-100 - Support, Single Eye Closed Mesh Cable Support Grip, 2.00-2.50", 304 Stainless Steel - Breakload is 3,400 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...
$163.74 -
Leviton L8718-100 - Pulling, Lace Up Cable Grip, 2.00-2.50", Galv- Breakload is 11,200 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Pulling grips are reusable devices for pulling bare conductors, insulated wires, synthetic rope, wire rope, and fiber optic cable
All pulling grip designs are fully tested to meet published break ratings without slipping
Learn More...
$180.64 -
Leviton L9714-100 - Support, 1.75-2.00" Breakload is 4490 LB 5000 LB
Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
Learn More...
$272.93
