Skip to Main Content »

Search Site
Your shopping cart is empty

All Prices are in Canadian Dollars

Lithonia Lighting FEM L48 4L MVOLT - Low-profile Enclosed And Gasketed Industrial LED - 48'' - 4,000 Lumens - Acrylic - Low Profile Frosted Lens - Medium - 120-277V - 0 - 10V Dimmng - 4000K Cool White - 80 CRI

Be the first to review this product

Lithonia Lighting FEM L48 4L MVOLT - Low-profile Enclosed And Gasketed Industrial LED - 48'' - 4,000 Lumens - Acrylic - Low Profile Frosted Lens - Medium - 120-277V - 0 - 10V Dimmng - 4000K Cool White - 80 CRI

  Is DLC Approved

Availability: In stock

$211.92

Lithonia Lighting FEM L48 4L MVOLT - Low-profile Enclosed And Gasketed Industrial LED - 48'' - 4,000 Lumens - Acrylic - Low Profile Frosted Lens - Medium - 120-277V - 0 - 10V Dimmng - 4000K Cool White - 80 CRI

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Additional Information

Brochures & Specific Sheets


Stock Code FEM L48 4L MVOLT
Brand Lithonia Lighting
Fixture Type Indoor Fixture
Voltage (V) 120-277V
Bulb Type LED
Lumens (Initial) 4000 lumens
CRI 80
Color Temperature (K) 4000K Cool White
Length (in) 48''
Lens: Acrylic
Weight (lb.) 11.9 lbs
UPC 190887619416
Type Linear
UL Listed CSA , UL , C-UL
Warranty 5-year limited warranty
Is DLC Approved Yes

FEM LED

CEILING/ SUSPENDED MOUNT

FEATURES & SPECIFICATIONS

INTENDED USE — A general purpose and energy-efficient surface-mounted or suspended LED fixture, suitable for wet, damp and/or cold locations. For vapor-tight demanding environments where moisture or dust is a concern and where relatively low fixture mounting heights and wide fixture spacing are common. Typical applications include industrial facilities, parking garages, retail malls, multi-purpose rooms, garden centers, and food processing. Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate.

CONSTRUCTION — One-piece 5VA fiberglass housing with integral perimeter channel utilizingcontinuous poured-in-place NEMA 4X gasket. Approved as a wireway and for through wiring. Captive polymeric latches are standard. Stainless steel latches (#316) available as an option for food processing or more demanding applications.

Power connection is easily accomplished through pre-drilled holes. Fixture easily mounts to ceilings and other solid structures, or can be suspended with chain, cable or rod using stainless steel mounting brackets (included).

OPTICS — Injection molded, acrylic lens (.080” thick) provides high impact-resistance comparable to 100% DR. For L48 Medium Distribution, a UV stabilized polycarbonate diffuser is available (.080" thick) in clear or frosted for additional impact strength where vandal protection is desired.

Expected service life of 60,000 hours at 80% lumen maintenance (L80); predicted life of more than 100,000 hours.

ELECTRICAL — Utilizes high-efficiency LEDs mounted to core circuit boards. High-efficiency drivers operate 120 thru 277V, 347V and 480V offered with 0-10 volt dimming, allowing granular control when coupled with wireless networking controls. Integral 6kV/3kA surge protection, tested in accordance to IEEE/ANSI standards.

INSTALLATION — Fixture can be ceiling or suspended mounted. Pre-punched stainless steel mounting brackets are included (two per luminaire) for easy field-attachment of bolts, screws and other mounting hardware. A covered ceiling is not required to maintain wet location listing or IP rating.

LISTINGS — CSA certified to UL and C-UL standards. Listed for wet locations in ambient temps ranging from -35°C (-31°F) to 25°C (77°F) when fixture is surface mounted or up to 45°C (113°F) when fixture is suspended at least 6" from ceiling. IP65, IP66 and IP67 rated. NSF splash-zone 2 certified and meets FDA/USDA guidelines. Nema 4X rated lens and housing. 1500 PSI hose-down.

DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of this product may be DLC Premium qualified or DLC qualified.

WARRANTY — 5-year limited warranty.

Note: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specifications subject to change without notice.


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.