Lighting Fixtures

Primary Voltage: 100-130V AC - Secondary Voltag: 24V DC - Dry / Damp Approved Location - Forward phase / ELV / TRIAC Dimming Tech - 50 / 60 Hz - 0.5A Input Current - 1.05A Output Current - Constant Voltage Power Supply Type - Class II Classification - Hard Wire Link Connector - Undercabinet Application

Liteline LED-STR-12-RGBBC - 12" LED RGB Blank Connector for LED Strip - 24V

Liteline LED-STR-6-RGBBC - 6" LED RGB Blank Connector for LED Strip - 24V

The LED-STR-BC-EL is a flexible extension leads designed for use will single colour 24V LED strip lights to extend the distance between two sections. For indoor use only (dry location).

The LED-STR3-72-DC-PF is an outdoor 72" LED strip power feed. It provides power from LED driver to single colour outdoor LED strip.

The LED-STR3-72-PF is an outdoor 72" LED strip power feed. It provides power from an outdoor LED driver to single colour outdoor LED strip.

LED-STR-PF is an indoor 12" (304.8mm) LED strip power feed. It provides power from LED driver to single colour LED strip.

LED-STR-RGBPF is an indoor 36" colour changing LED power feed. It provides power from driver (through a colour chaning controller) to a colour changing LED strip.

Low Voltage Power Feeds are DazzLED LED In-Wall Light power feeds. They provide power from a compatible 24V LED driver to DazzLED 24V LED In-Wall Lights. Hardwire to DC2.1 jack.

LED-STR-6-BC and LED-STR-12-BC are blank connecting cables to be used with undercabinet single colour LED strip lights. It provides flexibility in connecting two strip lights on any angle. The LED-STR-6-BC and LED-STR-12-BC are ideal for kitchen counters, cabinets and showcases.

LED-STR-6-BC and LED-STR-12-BC are blank connecting cables to be used with undercabinet single colour LED strip lights. It provides flexibility in connecting two strip lights on any angle. The LED-STR-6-BC and LED-STR-12-BC are ideal for kitchen counters, cabinets and showcases.

LED-SP-4 is a 4 way DC splitter harness. The LED-SP-4 is designed for use with all 24V LED tape and strip lights provided with DC 2.1 connectors. Available in White colour. For indoor use only.

The LED touch dimmer uses a touch technique allowing it to function as an on/off switch and a dimmer. Used to dim 24V DC LED tape and strip lights.

LED-TP-RGBPF is an indoor 12" (304.8mm) colour changing LED tape power feed. It provides power from LED driver (through colour changing controller) to colour changing TP1 LED tape.

LED-TP-PF is an indoor 12" (304.8mm) LED tape power feed. It provides power from LED driver to single colour TP1 and TP2 LED tape.

LED-TP-BL-EL is a flexible extension leads. The LED-TP-BL-EL is designed for use with all 24V LED tape lights to extend the distance between two sections.

LED-TP-XC is a blank x-connector for use with single colour indoor LED tape light.

LED-TP-RGBXC is a blank x-connector for use with colour changing indoor LED tape light.

The LED-TP-72-PF is a 24V power feed for use with TP5 and TP6 LED tape series. It allows for connecting the LED tape to a hardwire LED driver.