Lighting Fixtures

This open window faceplate is used in conjunction with single gang outdoor LED step light. Can be used on deck, porch, concrete/brick walls, or outdoor steps for even spread of light in dark areas.

This horizontal louver faceplate is used in conjunction with 3-gang outdoor LED step light. It directs all light downwards, casting a low, even spread of light, and adding discreet lighting to decks or outdoor steps.

This vertical eyelid faceplate is used in conjunction with single gang outdoor LED step light. It casts a subtle low level floor/path lighting and creates a wash of light to steps, walls, paths or patios.

This open window faceplate is used in conjunction with single gang outdoor LED step light. Can be used on deck, porch, concrete/brick walls, or outdoor steps for even spread of light in dark areas.

This horizontal louver faceplate is used in conjunction with round outdoor LED step light. It directs all light downwards, casting a low, even spread of light, and adding a discreet lighting to decks.

This horizontal louver faceplate is used in conjunction with single gang outdoor LED step light. It directs all light downwards, casting a low, even spread of light, adding discreet lighting to decks or outdoor steps.

This open window faceplate is used in conjunction with single gang outdoor LED step light. Can be used on deck, porch, concrete/brick walls, or outdoor steps for even spread of light in dark areas.

DawnRay DR12FL-SMT - 12" Double Ring Ultra Slim LED Flush Mount with RGB - 120VAC - 15W - 1200 Lumens - 2700K-6500K - Brushed Nickel Trim - Dimmable

DawnRay DR14FL - 14" Double Ring Ultra Slim LED Flush Mount with 3CCT Selectable - 120VAC - 20W - 1600 Lumens - 3000/4000/5000K - Brushed Nickel Trim - Dimmable

DawnRay DR14FL-SMT - 14" Double Ring Ultra Slim LED Flush Mount with RGB - 120VAC - 20W - 1600 Lumens - 2700K-6500K - Brushed Nickel Trim - Dimmable

DawnRay DR16FL - 16" Double Ring Ultra Slim LED Flush Mount with 3CCT Selectable - 120VAC - 25W - 2000 Lumens - 3000/4000/5000K - Brushed Nickel Trim - Dimmable

DawnRay DR12FL - 12" Double Ring Ultra Slim LED Flush Mount with 3CCT Selectable - 120VAC - 15W - 1200 Lumens - 3000/4000/5000K - Brushed Nickel Trim - Dimmable

DawnRay DR16FL-SMT - 16" Double Ring Ultra Slim LED Flush Mount with RGB - 120VAC - 25W - 2000 Lumens - 2700K-6500K - Brushed Nickel Trim - Dimmable

DawnRay DR60RF-SN - 6" Round Slim Panel - 15W - 100-125V AC - 0.09A - 1280 Lumens - 110° Beam Angle - 5 CCT All in One 2700K, 3000K, 3500K, 4000K, 5000K - Brushed Nickel Trim - Dimmable - Airtight Rated Suitable for 2nd Floor with Insulated Ceiling. Hole Cuit Size: 6-1/8"

DawnRay DR40RB-SN, 4" Round LED Baffle Recessed Fixture, Brushed Nickel Gimbal Trim, 120V 12W Up to 830 Lumens. CRI >95, 5 CCT 2700K/3000K/3500K/4000K/5000K All in One, 38 Degree Beam Angle, Dimmable, 36,000 Hrs Life, Hole Cut Size 3-7/8". 

IC-rated for direct contact with Insulation. Certified Airtight per ASTM E283-04. Suitable for Wet Location.

DawnRay DR40SG-SN - 4 Inch 5CCT LED Square Gimbal Ultra Slim Recessed Downlight - 100-125VAC - 9W - 860 Lumens - 38° Beam Angle - Brushed Nickel Finish - Dimmable

DawnRay DR40RG-SN - 4" OCCT Round Gimbal Slim Panel - 9W - 100-125V AC - 860 Lumens - 38° Beam Angle - 2700K, 3000K, 3500K, 4000K, 5000K All in One - Brushed Nickel Trim - Dimmable. Hole Cut Size: 4-1/4"

DawnRay DR40RBD-SN - 4 Inch Dim to Warm LED Round Baffle Recessed Downlight - 100-125VAC - 12W - 630 Lumens - 2200K-3000K - 38° Beam Angle - Brushed Nickel Finish - Dimmable - Air Tight