Lighting Fixtures

Primary Voltage: 100-130V AC - Secondary Voltag: 24V DC - Dry / Damp Approved Location - Forward phase / ELV / TRIAC Dimming Tech - 50 / 60 Hz - 0.5A Input Current - 1.05A Output Current - Constant Voltage Power Supply Type - Class II Classification - Hard Wire Link Connector - Undercabinet Application

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/hwb-dim-cdc-24v-30w.html

The LED-STR-BC-EL is a flexible extension leads designed for use will single colour 24V LED strip lights to extend the distance between two sections. For indoor use only (dry location).

Liteline LED-STR-6-RGBBC - 6" LED RGB Blank Connector for LED Strip - 24V

Liteline LED-STR-12-RGBBC - 12" LED RGB Blank Connector for LED Strip - 24V

The LED-STR3-72-DC-PF is an outdoor 72" LED strip power feed. It provides power from LED driver to single colour outdoor LED strip.

The LED-STR3-72-PF is an outdoor 72" LED strip power feed. It provides power from an outdoor LED driver to single colour outdoor LED strip.

LED-STR-PF is an indoor 12" (304.8mm) LED strip power feed. It provides power from LED driver to single colour LED strip.

LED-STR-RGBPF is an indoor 36" colour changing LED power feed. It provides power from driver (through a colour chaning controller) to a colour changing LED strip.

Low Voltage Power Feeds are DazzLED LED In-Wall Light power feeds. They provide power from a compatible 24V LED driver to DazzLED 24V LED In-Wall Lights. Hardwire to DC2.1 jack.

LED-STR-6-BC and LED-STR-12-BC are blank connecting cables to be used with undercabinet single colour LED strip lights. It provides flexibility in connecting two strip lights on any angle. The LED-STR-6-BC and LED-STR-12-BC are ideal for kitchen counters, cabinets and showcases.

These IP54 rated connectors are everything you need to power, extend and maneuver Color Tape. Stranded 20 AWG wires with snap-in mechanism makes them fl exible and easy to assemble on-site.

These IP54 rated connectors are everything you need to power, extend and maneuver Color Tape. Stranded 20 AWG wires with snap-in mechanism makes them fl exible and easy to assemble on-site.

These IP54 rated connectors are everything you need to power, extend and maneuver Color Tape. Stranded 20 AWG wires with snap-in mechanism makes them fl exible and easy to assemble on-site.

These IP65 rated connectors are everything you need to power, extend and maneuver full color Mood Tape. Stranded 20 AWG wires with snap-in mechanism makes them fl exible and easy to assemble on-site.

These IP65 rated connectors are everything you need to power, extend and maneuver tunable white tape. Stranded 20 AWG wires with snap-in mechanism makes them fl exible and easy to assemble on-site.

These IP65 rated connectors are everything you need to power, extend and maneuver full color Mood Tape. Stranded 20 AWG wires with snap-in mechanism makes them fl exible and easy to assemble on-site.

These IP65 rated connectors are everything you need to power, extend and maneuver full color Mood Tape. Stranded 20 AWG wires with snap-in mechanism makes them fl exible and easy to assemble on-site.

LED-STR-6-BC and LED-STR-12-BC are blank connecting cables to be used with undercabinet single colour LED strip lights. It provides flexibility in connecting two strip lights on any angle. The LED-STR-6-BC and LED-STR-12-BC are ideal for kitchen counters, cabinets and showcases.

RAB Design UC-12W POWER SUPPLY 24V - Plug-in Power Supply - 12 Watt - 24V