Lighting Fixtures

Sharkward's ANT-5-4T pluggable series are designed to be used in commercial and industrial installations (Dimming &daylight harvesting & bluetooth versions are available). Its pluggable design is convenient for factory pre-installation.

Add-On Photocell for LED Wall Pack Fixtures; 120-277 Volt

LED Photocell - Black Finish - Outdoor Use - 120V

The vapour barrier extender is for use with Liteline recessed IC rated fixtures to prevent air leakage from entering into the attic. Suitable for ceilings and damp locations.

The vapour barrier extender is for use with Liteline 3½" and 4" retrofit IC fixtures that are approved for insulated ceilings, to prevent air leakage from your living space into the attic. Suitable for insulated ceilings.

The vapour barrier extender is for use with Liteline SlimLED fi xtures, to prevent air leakage from your living space into the attic. Suitable for insulated ceilings.

The vapour barrier extender is for use with Liteline SlimLED fi xtures, to prevent air leakage from your living space into the attic. Suitable for insulated ceilings.

The vapour barrier extender is for use with Liteline 6" SlimLED fixtures, to prevent air leakage from your living space into the attic. Suitable for insulated ceilings.

Luminiz CTLSL360 - String Light Dimmer Kit 360W Max - AC120V 60Hz

Luminiz CTLSL180 - String Light Dimmer Kit 180W Max - AC120V 60Hz

Primary Voltage: 100-130V AC - Secondary Voltag: 24V DC - Dry / Damp Approved Location - Forward phase / ELV / TRIAC Dimming Tech - 50 / 60 Hz - 0.9A Input Current - 2.1A Output Current - Constant Voltage Power Supply Type - Class II Classification - Hard Wire Link Connector - Undercabinet Application

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/hwb-dim-cdc-24v-60w.html

Primary Voltage: 100-130V AC - Secondary Voltag: 24V DC - Dry / Damp Approved Location - Forward phase / ELV / TRIAC Dimming Tech - 50 / 60 Hz - 0.5A Input Current - 1.05A Output Current - Constant Voltage Power Supply Type - Class II Classification - Hard Wire Link Connector - Undercabinet Application

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/hwb-dim-cdc-24v-30w.html

A high performance 2-wire dimming solution suitable for constant voltage (24V DC) LED fixtures.

* This is a discontinued model. Sold while quantity last

Primary Voltage: 100-130V AC - Secondary Voltag: 24V DC - Dry / Damp Approved Location - Forward phase / ELV / TRIAC Dimming Tech - 50 / 60 Hz - 2A Input Current - 4A Output Current - Constant Voltage Power Supply Type - Class II Classification - Hard Wire Link Connector - Undercabinet Application

Venture Lighting AC25420 - 3/8” 3-Wire 14/3 600V Max 6ft Flex Whip

Liteline LED-STR-12-RGBBC - 12" LED RGB Blank Connector for LED Strip - 24V

Venture Lighting AC25426 - 3/8” 6-wire 18/4, 18/2 6ft Flex Whip

Venture Lighting AC25425 - 3/8” 5-wire 18/3, 18/2 6ft Flex Whip

The LED-STR-BC-EL is a flexible extension leads designed for use will single colour 24V LED strip lights to extend the distance between two sections. For indoor use only (dry location).