Lighting Fixtures

12W - 100-135V - 2700K-5000K - Dimmable - White Finish - Up to 850 Lumens - 38° Beam Angle - Wet Locations / Insulated Ceilings - 90+ CRI - Forward/reverse-phase TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 3000K - Dimmable - White Finish - 830 Lumens - 40° Beam Angle - Wet Locations / Insulated Ceilings - 90 CRI - TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 5000K - Dimmable - White Finish - 885 Lumens - 40° Beam Angle - Wet Locations / Insulated Ceilings - 90 CRI - TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - Dim-to-Warm - 3000K~2000K - Dimmable - White Finish - Up to 700 Lumens - 38° Beam Angle - Wet Locations / Insulated Ceilings - 90+ CRI - Forward/reverse-phase TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 2700K-5000K - Dimmable - White Finish - Up to 850 Lumens - 38° Beam Angle - Wet Locations / Insulated Ceilings - 90+ CRI - Forward/reverse-phase TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

3-1/4 Inch Specular Reflector Trim - White/Black

The HV3-TH01 is a powder-coated steel round stepped baffle trim. Simply designed to allow a clean look while still being functionally adjustable. The adjustable aiming capability of the lamp holder (35° tilt) provides versatility for a wide range of accent and task applications.

Side mounted hinge for directional light adjustment, allows greater aiming anangle and does not block light beam at steep aiming angles. Front re-lamping improves re-lamping convenience. Cast metal construction. Vertically adjustable 0 degrees to 50 degrees ; rotates 360 degrees within the housing.

TRIM,3 1/4 INCH STEPPED GIMBAL

Square profile with square opening. Light source is hidden up inside; cut-out gives the appearance of a sheer openng into the ceiling. Stamped metal construction.

3-1/4 Inch Specular Reflector Trim - White/Chrome

3-Inch Gimbal Trim, For MR16, GU10, JDR, HR16 Bulbs, Clear Cover Glass, Matte White Finish

The HV3-TH18 is a powder-coated round tilting gimbal trim. Simply designed to allow a clean look while still being functionally adjustable. The adjustable aiming capability (35° tilt) provides versatility for a wide range of accent and task applications.

TRIM,3 1/4 INCH PIN HOLE

Convex contour profile is unique and sublime, simplicity in design allows a straight-forward appearance while still being functionally adjustable. Stamped metal construction. Vertically adjustable 0 degree to 30 degree; rotates 360 degree within the housing. 3 1/4" housing required, sold separately.

3-1/4 Inch Stepped Gimbal Trim - White/Black

Sealed And Gasketed For Use In Areas Where Occasional Direct Spray From Water May Occur. Frosted Glass Lens Diffused Light Output. Full Return With Gasket To Eliminate Light Leakage. 3 Inch Housing Required, Sold Separately.

The RTM3012S is a 3" shower trim comprising of a metal flange and a frosted glass lens designed for our RF3 series housings with MR16 lamps. The frosted glass lens is designed to protect the lamp from moisture. Suitable uses of the RTM3012S include bathrooms, showers and exterior soffits.

Circular profile with square opening. Light source is hidden up inside; cut- out gives the appearance of a sheer opening into the ceiling. Stamped metal construction. Fixed down-light. 3 1/4" housing required, sold seperately.