Lighting Fixtures

The floating electrical feed permits mounting any point of trac under the outlet box. Includes floating connector, outlet box cover, and extra trac dead end.

The conduit feed is for surface wiring using a standard 1/2-inch connector. Reverse polarity R34R conduit feed is designed for use in opposite polarity orientation compared to standard feed connectors.

The end feed connector feeds trac from above with a flexible conduit, BX, or end feed in pendant systems. Accepts a standard 1/2-inch connector. Reverse polarity R38R Series end feed connector is designed for use in opposite polarity orientation compared to standard feed connectors.

Trac-Master™ T-Series low-profile, single-circuit track sections can be surface or pendant mounted. They feature an I-beam cross section that provides added strength and rigidity in suspended pendant applications and are compatible with a full range of feed, connector, and mounting accessories to satisfy virtually any track lighting requirement.

Trac-Master™ T-Series low-profile, single-circuit track sections can be surface or pendant mounted. They feature an I-beam cross section that provides added strength and rigidity in suspended pendant applications and are compatible with a full range of feed, connector, and mounting accessories to satisfy virtually any track lighting requirement.

The T23 Series straight connector joins 2 trac sections end to end.

The T24 Series adjustable connector joins 2 trac sections to make a 90-degree angle or straight run. Straight and right angle covers are supplied. Can be provided with integral ground connection. For outlet box feed, a T27 cover plate is required.

The T38 Series end feed connector enables trac to be fed from above with flexible conduit, BX, or end feed in a pendant system. Accepts a standard 1/2-inch connector. Reverse polarity T38R Series end feed connector is designed for use in opposite polarity orientation compared to standard feed connectors.

The T40N Series Monopoint Adapters increase the versatility of Juno® trac fixtures by enabling them to be mounted where trac sections might not offer the best aesthetic or functional lighting solution. They mount directly to outlet boxes and accept one 120V Juno trac fixture. Available in finishes shown

Single circuit track is available for 120V applications. Single hot and neutral conductors are rated for 20 Amps per branch circuit. Copper electrical conductors are concealed in an insulating thermo plastic low profile track cross-section.

Single circuit track is available for 120V applications. Single hot and neutral conductors are rated for 20 Amps per branch circuit. Copper electrical conductors are concealed in an insulating thermo plastic low profile track cross-section.

Single circuit track is available for 120V applications. Single hot and neutral conductors are rated for 20 Amps per branch circuit. Copper electrical conductors are concealed in an insulating thermo plastic low profile track cross-section.

Single circuit track is available for 120V applications. Single hot and neutral conductors are rated for 20 Amps per branch circuit. Copper electrical conductors are concealed in an insulating thermo plastic low profile track cross-section.

Single circuit track is available for 120V applications. Single hot and neutral conductors are rated for 20 Amps per branch circuit. Copper electrical conductors are concealed in an insulating thermo plastic low profile track cross-section.

I-Connector, connects two track sections end to end for an in-line configuration (180º).

Flexible Connector, for connecting two tracks at any angle up to 180° or wall to ceiling or pitched ceiling application.

The ATKP02 is an L-connector, which connects two track sections at 90°. Convertible to I-connector with included cover.

T-Power Feed Connector, connects three track sections at 90° in a T-configuration. It comes with a power feed.

Live End conduit feed (7/8” knockout) for top or end feed. Solid 12-gauge conductors. System Electrical Rating: 20A, 120V, 60Hz.