Lighting Fixtures

The conduit feed is for surface wiring using a standard 1/2-inch connector. Reverse polarity R34R conduit feed is designed for use in opposite polarity orientation compared to standard feed connectors.

Single circuit track is available for 120V applications. Single hot and neutral conductors are rated for 20 Amps per branch circuit. Copper electrical conductors are concealed in an insulating thermo plastic low profile track cross-section.

Live End with canopy, provides power to end of track from junction box.Solid 12-gauge conductors.

Liteline LE6111-SL - Live End Power Feed With Canopy - Silver Color - Single Circuit 2 Wire Track System

The T40N Series Monopoint Adapters increase the versatility of Juno® trac fixtures by enabling them to be mounted where trac sections might not offer the best aesthetic or functional lighting solution. They mount directly to outlet boxes and accept one 120V Juno trac fixture. Available in finishes shown

Liteline WE6110-SL - Wired End - Single Circuit 2 Wire Track System - Silver

Wired End provides power to the end of a track from a receptacle. Solid 12-gauge conductors. Comes with a 15-ft. power cord.

Liteline IC6101-SL - I-Connector - Single Circuit 2 Wire Track System - Silver

I-Connector, connects two track sections end to end for an in-line configuration (180º).

The ATKP02 is an L-connector, which connects two track sections at 90°. Convertible to I-connector with included cover.

The T24 Series adjustable connector joins 2 trac sections to make a 90-degree angle or straight run. Straight and right angle covers are supplied. Can be provided with integral ground connection. For outlet box feed, a T27 cover plate is required.

T-Power Feed Connector, connects three track sections at 90° in a T-configuration. It comes with a power feed.

Liteline XC6104-SL - X-Connector - Single Circuit 2 Wire Track System - Silver

The T23 Series straight connector joins 2 trac sections end to end.

Flexible Connector, for connecting two tracks at any angle up to 180° or wall to ceiling or pitched ceiling application.