Lutron GRX-TVI - 0-10 V Interface - 100 - 277 V

Operating voltages

• Provides 100-127 V or 200-240 V (CE) power to loads
• Requires 100-127 V or 200-240 V power for internal operations

Features and capacities

• Dims 0-10 V LED drivers powered by 100-277 V (driver must provide 0-10 V source); consult Lutron® for LED performance
• Dims 0-10 V electronic fluorescent or 0-10 V dimming ballast powered by 100-277 V (ballast must provide 0-10 V source)
• Switches up to 16 A of electronic capacitive fluorescent ballasts/other loads
• Switches motors up to 0.25 HP @ 100-127 V, 0.50 HP @ 200-277 V
• 0-10 V control output current rating:10μA-127mA (sink only)
• Up to five 0-10 V Interfaces may be connected to one control unit zone; this allows one zone to control up to five 16 A circuits of 0-10 V electronic dimming ballasts, or LED drivers or five motors
• Indoor use only

Dimensions and mounting

• Width: 6.10 in (155 mm)
Height: 12.50 in (318 mm)
Depth: 3.30 in (84 mm)
• Wall-mount
• Requires incoming power feed wires, incoming control wires and outgoing load wires
• Approved for installation in spaces designed for environmental air handling per 2011 NEC® article 300.22 (c)