Heating & Cooling

Overall Case Dimensions: 7.697"H x 4.4"W x 3.8" D
Pilot Duty: 690 VA @ 120, 208, or 240 VAC
Maximum HP: 2HP @ 120, 208 or 240 VAC
Amperage: 40-Amp Non-Inductive @ 120, 208 or 240 VAC
Pressure Terminated: No
Time Initiated Temperature: No
Time Initiated/Time Terminated: Yes

• Dial: 24 Hour, 2 ON and 2 OFF trippers.
• Switch Rating: 40 amps resistive or tungsten, 1000 VA pilot duty, 2 hp at 120 volts and 5 hp at 240 volts.
• Operations: Up to 10 ON/OFF operations per 24 hours. With manual ON/OFF switch that allows circuit to be hand operated without disturbing the scheduled setting.
• Minimum Setting: 1 hour between ON/OFF, 2 hours between OFF/ON.
• Enclosure: Non corrosive NEMA 1.
• For additional tripper pairs, order part number STPIN.

Overall Case Dimensions: 7.697"H x 4.4"W x 3.8" D
Pilot Duty: 690 VA @ 120, 208, or 240 VAC
Maximum HP: 2HP @ 120, 208 or 240 VAC
Amperage: 40-Amp Non-Inductive @ 120, 208 or 240 VAC
Pressure Terminated: Yes
Time Initiated Temperature: Yes
Time Initiated/Time Terminated: No

Overall Case Dimensions: 7.697"H x 4.4"W x 3.8" D
Pilot Duty: 690 VA @ 120, 208, or 240 VAC
Maximum HP: 2HP @ 120, 208 or 240 VAC
Amperage: 40-Amp Non-Inductive @ 120, 208 or 240 VAC
Pressure Terminated: No
Time Initiated Temperature: No
Time Initiated/Time Terminated: Yes

Overall Case Dimensions: 7.697"H x 4.4"W x 3.8" D
Pilot Duty: 690 VA @ 120, 208, or 240 VAC
Maximum HP: 2HP @ 120, 208 or 240 VAC
Amperage: 40-Amp Non-Inductive @ 120, 208 or 240 VAC
Pressure Terminated: Yes
Time Initiated Temperature: Yes
Time Initiated/Time Terminated: No

Heater tip 7/16" diameter - Durable metal braid - Cannot be cut, spliced, extended, or altered in any way - Silicone construction - These heaters are water resistant only, not water proof - These heaters can get wet, but they cannot sit in water for any period of time

Silicone construction - Cannot be cut, spliced, extended, or altered in any way - These heaters are water resistant only, not water proof

Heater tip 7/16" diameter - Durable metal braid - Cannot be cut, spliced, extended, or altered in any way - Silicone construction - These heaters are water resistant only, not water proof - These heaters can get wet, but they cannot sit in water for any period of time

Eliminates frost build-up on doors and cabinet fronts - Prevents moisture on glass display doors - Cannot be cut, spliced, extended, or altered in any way

Heater tip 7/16" diameter - Durable metal braid - Cannot be cut, spliced, extended, or altered in any way - Silicone construction - These heaters are water resistant only, not water proof - These heaters can get wet, but they cannot sit in water for any period of time

Eliminates frost build-up on doors and cabinet fronts - Prevents moisture on glass display doors - Cannot be cut, spliced, extended, or altered in any way

Ideal for all evaporator and condenser coil cleaning - Lightweight for easy carrying - Rugged housing for rough service & long life - Includes durable quick-connect hoses, wand, and trigger sprayer - Great for mini-split indoor Coils and outdoor coils - On-board storage cabinet for all accessories

Exact replacement silicon carbide round igniter - Superior gas lighting ability - Lower power consumption - 18 gauge copper high temperature fiberglass insulated lead wires - Supco® round igniters offer an efficient , stronger, reliable hot surface Silicon Carbide design - Faster time to temperature response - Stronger more durable design - More robust in transit - Higher resistance to oxidation - Longer usable life - < 17 seconds @ 120 VAC - 40-100 Ohms @ 75°F +/- 10°F

Exact replacement silicon carbide flat igniter - Nichrome heavy gauge construction - < 17 seconds @ 120 VAC Time to temperature (1800°F) - 40-100 Ohms @ 75°F +/- 10°F Cold resistance

Exact replacement silicon carbide round igniter - Superior gas lighting ability - Lower power consumption - 18 gauge copper high temperature fiberglass insulated lead wires - Supco® round igniters offer an efficient , stronger, reliable hot surface Silicon Carbide design - Faster time to temperature response - Stronger more durable design - More robust in transit - Higher resistance to oxidation - Longer usable life - < 17 seconds @ 120 VAC - 40-100 Ohms @ 75°F +/- 10°F

Universal flat silicon carbide igniter kit. Includes brackets and hardware to replace hundreds of OEM furnace and boiler igniters - Nichrome heavy gauge construction - < 17 seconds @ 120 VAC Time to temperature (1800°F) - 40-100 Ohms @ 75°F +/- 10°F Cold resistance - 24" Lead

Exact replacement silicon carbide flat igniter - Nichrome heavy gauge construction - < 17 seconds @ 120 VAC - Time to temperature (1800°F) - 40-100 Ohms @ 75°F +/- 10°F Cold resistance

Universal flat silicon nitride igniter kit. Includes brackets and hardware to replace hundreds of OEM furnace and boiler igniters - Superior gas lighting ability - Lower power consumption - 18 gauge copper high temperature fiberglass insulated lead wires - Supco® flat igniters offer an efficient , stronger, reliable hot surface Silicon nitride design - Faster time to temperature response - Stronger more durable design - More robust in transit - Higher resistance to oxidation - Longer usable life - < 17 seconds @ 120 VAC - 40-100 Ohms @ 75°F +/- 10°F - > 50,000 @75°F+/-10%, 120V +/-10%

Exact replacement silicon carbide flat igniter - Nichrome heavy gauge construction - < 17 seconds @ 120 VAC Time to temperature (1800°F) - 40-100 Ohms @ 75°F +/- 10°F Cold resistance