Heating & Cooling

Leaks show as bright red stains under normal lighting, bright orange under UV light - Sold 12 / Case - Non-volatile, will not sludge or deposit gum - Use 1 ounce per 2 gallons of water - 4 ounce plastic bottle

List price is for whole pack of 12 pieces

Non-Toxic - Environmentally Friendly - Sold 6 / Case - Evaporates leaving no residue - no cleanup - Does not pit surfaces - 1 gallon jug

List price is for whole pack of 6 pieces

Non-Toxic - Environmentally Friendly - Sold 12 / Case - Evaporates leaving no residue - no cleanup - Does not pit surfaces - 10 ounce squeeze bottle

List price is for whole pack of 12 pieces

Highside® Mid temperature Gas Leak Detector is non-freezing, non-toxic, non-hazardous & does not contain ethylene glycol. This fluorescent bubble type leak detector is rated to 27° F (-3° C) and can be used on hot or cold piping - Sold 6 / Case - 1 gallon plastic jug

List price is for whole pack of 6 pieces

Highside® Mid temperature Gas Leak Detector is non-freezing, non-toxic, non-hazardous & does not contain ethylene glycol. This fluorescent bubble type leak detector is rated to 27° F (-3° C) and can be used on hot or cold piping - Sold 12 / Case - 32 ounce trigger spray bottle

List price is for whole pack of 12 pieces

Highside® Mid temperature Gas Leak Detector is non-freezing, non-toxic, non-hazardous & does not contain ethylene glycol. This fluorescent bubble type leak detector is rated to 27° F (-3° C) and can be used on hot or cold piping - Sold 24 / Case - 8 ounce plastic bottle with dauber

List price is for whole pack of 24 pieces

Highside® Low temperature Gas Leak Detector is non-freezing, non-toxic, non-hazardous & does not contain ethylene glycol. This fluorescent bubble type leak detector is rated to -30° F (-34° C) and can be used on hot or cold piping - Sold 6 / Case - 1 gallon plastic jug

List price is for whole pack of 6 pieces

Highside® Low temperature Gas Leak Detector is non-freezing, non-toxic, non-hazardous & does not contain ethylene glycol. This fluorescent bubble type leak detector is rated to -30° F (-34° C) and can be used on hot or cold piping - Sold 12 / Case - 32 ounce trigger spray bottle

List price is for whole pack of 12 pieces

Highside® Low temperature Gas Leak Detector is non-freezing, non-toxic, non-hazardous & does not contain ethylene glycol. This fluorescent bubble type leak detector is rated to -30° F (-34° C) and can be used on hot or cold piping - Sold 24 / Case - 8 ounce plastic bottle with dauber

List price is for whole pack of 24 pieces

Compatible with all refrigerants and lubricants, old and new - Polyol Ester base - Sold 6 / Case - 16 ounce plastic bottle - Fluorescent under ultraviolet light - Non-volatile, will not sludge or deposit gum - Use ⅛ oz. per pound of refrigerant

List price is for whole pack of 6 pieces

Leaks show as bright red stains - Compatible with all refrigerants and lubricants, old and new - Polyol Ester base - Sold 4 / Case - 1 gallon can - Fluorescent under ultraviolet light - Non-volatile, will not sludge or deposit gum - Use ⅛ oz. per pound of refrigerant

List price is for whole pack of 4 pieces

Leaks show as bright red stains - Harmless to refrigeration, air conditioning, and hydraulic equipment - Mineral Oil Base - Sold 4 / Case - 1 gallon can - Fluorescent under ultraviolet light - Non-volatile, will not sludge or deposit gum - Use ⅛ oz. per pound of refrigerant

List price is for whole pack of 12 pieces

Highside® Leak Lock is a state-of-the-art high strength, pipe joint sealant consisting of chemically resistant film formers, plasticizers, reinforcing fillers and solvents, useable on all clean metal or plastic surfaces

List price is for whole pack of 12 pieces

Highside® Solderlene is a high quality, paste type, non-acid soldering flux - For use with low and mid -temp, soft solders, both lead and lead-free - Industrial strength wetting agents to promote solder flow - Effective on all metals EXCEPT aluminum and magnesium - 4 ounce brush top plastic jar - Sold 12 / Case

List price is for whole pack of 12 pieces

Quick Service Kits come ready to use with a 2 ounce injector, pre-filled with Highside® Trace2, along with a 12" charging hose with control valve and caps

List price is for whole pack of 6 pieces

10 Minutes Working Time, starts to set in 15 minutes - Mix by hand - 90% cure in 4 Hours. Full cure, 24 Hours - 5,950 PSI Tensile Strength - 18,000 PSI Compression Strength

List price is for whole pack of 12 pieces

Solderless One Part Copper Bonding - Easy to Use and No Mixing Required - Starts to set up in 20 seconds and forms a solid bond in 3 minutes - In 12 minutes the bond will withstand 850psi of refrigerant pressure - Bonds Copper, Aluminum and Brass in any Combination - Compatible with all refrigerants and oils - One Bottle Makes 200 or More Bonds on 1/2 -inch Tubing

List price is for whole pack of 12 pieces

Use for copper, aluminum, steel & PVC - Non-toxic - Sold in display case (12/case) - Can be used on the low or high pressure sides of system - Safe to use with all refrigerants

List price is for whole pack of 12 pieces

Two part - Bonding Fluid and Micro Cells - For permanently sealing holes in all metals and rigid plastics - Forms a high strength bond in seconds - Full cure in 20 minutes - put equipment back in service - Rated at 200psi contained pressure - Handles 200°F (93.3°C) continuous temperature

List price is for whole pack of 12 pieces