Heating & Cooling

Time switch in plastic enclosure with heater protection, DPST Switch, 208-277 Clock Supply-Volt - Designed for commercial, industrial and residential applications - Have the highest motor load ratings in the industry - Equipped with ON and OFF trippers - Heater Protection Circuit: 10-Amps, 240-Volt max

Time switch in metal enclosure with heater protection, DPST Switch, 208-277 Clock Supply-Volt - Designed for commercial, industrial and residential applications - Have the highest motor load ratings in the industry - Equipped with ON and OFF trippers - Heater Protection Circuit: 10-Amps, 240-Volt max

Highest motor load ratings in the industry Provides direct 24 hour control of most loads 1 to 12 ON/OFF operations each day Minimum ON/OFF times of 1 hour All models equipped with one ON and one OFF tripper

24Hr Programmable 1or2-Spd Seasonality Timer Mechanism with Additional Aux Circuit

AXIAL FAN - 32 CFM , 10W, 230V, 3100 RPM. Die-cast Aluminum Housing, Shaded Pole Motor. Ball Bearing, Impeller: Metal, Connection: Wire leads.

AXIAL FAN - 32 CFM ,10W, 115V, 3100 RPM. Die-cast Aluminum Housing, Shaded Pole Motor. Sleeve Bearing, Impeller: Metal, Connection: Wire leads.

Provides coordinated control for heater and filter pump operations - Designed to turn OFF a gas fired swimming pool heater approximately 20 minutes before the filter pump shuts down - Eliminates the problem of pounding and knocking due to overheated water, reduces scale and lime deposits and extends the service life of the heater - The 24-hour dial allows up to 12 ON/OFF operations each day - One set of ON and OFF trippers is supplied with each switch

AXIAL FAN - 21 CFM , 9W, 115V, 2000 RPM. Die-cast Aluminum Housing, Shaded Pole Motor. Sleeve Bearing, Impeller: Metal, Connection: Wire leads.

6Watts - 115Volts - 0.40Amps - 1/1550 Spd/RPM - SP Type - 3.09''Body - 1/4" × 20 Hubless Shaft

4Watts - 0.35Amps - 115 Volts - CWRot - 1550RPM  - 2.58'' A Dim - HublessShaft 

9Watts - 0.30Amps - 230 Volts - CCW Rot - 1550 RPM  - 2.83'' A Dim - Hubless Shaft 

5Watts - 0.35Amps - 115 Volts - CW Rot - 1550 RPM  - 3.44'' A Dim - Hubless Shaft 

2Watts - 0.25Amps - 115 Volts - CW Rot - 1550 RPM  - 2.60'' A Dim - Hubless Shaft 

• Single speed, 1550 rpm
• Rotation is determined by viewing opposite shaft end (OSE)
• Totally enclosed; Overload protected
• Permanent lubrication; Sleeve bearings
• Universal mounting; Threaded mounting holes
• Hardware included

9Watts - 115Volts - 0.52Amps - 1/1550 Spd/RPM - SP Type - 3.15''Body - 1/4" × 20 Hubless Shaft

9Watts - 230Volts - 0.27Amps - 1/1550 Spd/RPM - SP Type - 3.11''Body - 1/4" × 20 Hubless Shaft

9Watts - 0.60Amps - 115Volts - CWRot - 1550RPM  - 3.07'' A Dim - Hubless Shaft

4Watts - 115Volts - 0.29Amps - 1/1550 Spd/RPM - SP Type - 2.60''Body - 1/4" × 20 Hubless Shaft

• Single speed, 1550 rpm
• Rotation is determined by viewing opposite shaft end (OSE)
• Totally enclosed; Overload protected
• Permanent lubrication; Sleeve bearings
• Universal mounting; Threaded mounting holes
• Hardware included