Pool and Spa Controls

The Intermatic PX600 600 watt safety transformer is specifically designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights. A grounded shield between the primary and secondary windings assures safe operation and the built-in circuit protection will disconnect power to the transformer in case of defect or overload. Features ground shield.

*** Replace Obsolete model PX600S

The Intermatic PX100S 100 watt safety transformer is specifically designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights. A grounded shield between the primary and secondary windings assures safe operation and the built-in circuit protection will disconnect power to the transformer in case of defect or overload. Features ground shield.

The Intermatic PX300S 300 watt safety transformer is specifically designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights. A grounded shield between the primary and secondary windings assures safe operation and the built-in circuit protection will disconnect power to the transformer in case of defect or overload. Features ground shield.

The Intermatic PX100 100 watt safety transformer is specifically designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights. A grounded shield between the primary and secondary windings assures safe operation and the built-in circuit protection will disconnect power to the transformer in case of defect or overload. Features ground shield.

24Hr Programmable 1or2-Spd Seasonality Timer Mechanism with Additional Aux Circuit

Provides coordinated control for heater and filter pump operations - Designed to turn OFF a gas fired swimming pool heater approximately 20 minutes before the filter pump shuts down - Eliminates the problem of pounding and knocking due to overheated water, reduces scale and lime deposits and extends the service life of the heater - The 24-hour dial allows up to 12 ON/OFF operations each day - One set of ON and OFF trippers is supplied with each switch

This heavy duty Intermatic T104M 24 hour mechanical time switch mechanism is designed for industrial, commercial, and residential applications, and has the highest motor load ratings in the industry. The mechanical time switch provides up to 12 ON/OFF operations each day with a minimum ON/OFF time of one hour. It is also equipped with 'ON' and 'OFF' trippers and can be installed in almost all Intermatic enclosures.

The P1353ME mechanism can be installed into almost any Intermatic enclosure and has the ability to program up to three circuits. Choose between seven pre-programmed modes of operation, which include single speed pump or 2-speed pump/cleaner pump combinations. In addition, programmed modes that include auxiliaries can control pumps up to 3 HP as well as underwater, landscape and/or fountain lighting. Countdown and Override features allow cycle interruptions when pool/spa service is required. All timing and protection associated with filter pump/cleaner pump combinations and two-speed pumps has already been integrated into the software.

This heavy duty Intermatic T101M 24 hour mechanical time switch mechanism is designed for industrial, commercial, and residential applications, and has the highest motor load ratings in the industry. The time switch provides up to 12 ON/OFF operations each day with a minimum ON/OFF time of one hour. It is also equipped with 'ON' and 'OFF' trippers and can be installed in almost all Intermatic enclosures.

Used in multiple applications: Filter pumps, Pool/Spa Lights, Water Features, Fountains - All plastic NEMA 3R rated for Indoor/Outdoor installation - Can be used with the Intermatic P1103FE Enclosure - 1.5 HP, 120 VAC; 3.0 HP, 240 VAC - Standard mechanism fits in all standard Intermatic time switch enclosures and swimming pool control panels

The Intermatic PA114 black mounting bracket is especially designed for pools, spas, and pool-spa combinations. Versatile, rugged, and simple to install, this junction box safely supports the connections of up to four high or low voltage underwater lights. These mounting brackets are for use with the PJB4175 junction box and comply with all the requirements of UL1241 and the National Electric Code.

This black Intermatic PJB2175 junction box features an innovative strain relief design, requiring only two screws to attach the lid to the base. The junction box provides a safe and reliable connection for up to two pool/spa lights and accepts multiple conduit sizes and its primary application is in pools, spas, and landscaping.

This black Intermatic PJB4175 junction box features an innovative strain relief design, requiring only two screws to attach the lid to the base. The junction box provides a safe and reliable connection for up to four pool/spa lights and accepts multiple conduit sizes, and its primary application is in pools, spas, and landscaping.

Valve/Pump Switch Mechanism

Easily snap into most existing Inerratic enclosures with available mechanism support bracket - Controls up to three valve actuators - Switches heater and thermostat HIGH/LOW - Remote control capabilities - Mechanism only, type 3R enclosure not included

These Air Switches are designed to control one piece of equipment with one air button. The switch can safely control loads without electricity at the pool, spa or tub side, such as a pump, blower or light. Each time pressure is applied to the remote air button the connected equipment will operate as described in the table. 

To relocate the antenna and ensure communication between the Hand-Held and control center - Can be used with the Intermatic PE650 - Can be used with the Intermatic PE953 - Can be used with the Intermatic PA122 - Ensuring that communication between the Hand-Held unit and the control center is successful.

Use the Intermatic RC6F Universal Air Switch Button as part of the Air Switch Kit to control one piece of equipment with an air button. The switch can safely control loads without electricity at the pool, spa, or tub side. For example, a pump, air blower, heater, or light can be turned on or off from the side of the pool without risk of electric shock. The tubing is run from the air button to the air control. When the air button is pushed, a blast of air travels through the tubing and engages the air control. 

The Intermatic 119T86A is a 120 volt transformer. This model is designed for use with T8845PV sprinkler and irrigation time switch. It features a metal surge strip with 6 outlets.