Solid State Components

Four wire adapter kit for EDT series Timers.

Three wire adapter kit for EDT series Timers.

5-pack replacement trippers for S8000 series timers.

Overall Case Dimensions: 7.697"H x 4.4"W x 3.8" D
Pilot Duty: 690 VA @ 120, 208, or 240 VAC
Maximum Hp: 2Hp @ 120, 208 or 240 VAC
Amperage: 40-Amp Non-Inductive @ 120, 208 or 240 VAC
Pressure Terminated: Yes
Time Initiated Temperature: Yes
Time Initiated/Time Terminated: No

• Dial: 24 Hour, 2 ON and 2 OFF trippers.
• Switch Rating: 40 amps resistive or tungsten, 1000 VA pilot duty, 2 hp at 120 volts and 5 hp at 240 volts.
• Operations: Up to 10 ON/OFF operations per 24 hours. With manual ON/OFF switch that allows circuit to be hand operated without disturbing the scheduled setting.
• Minimum Setting: 1 hour between ON/OFF, 2 hours between OFF/ON.
• Enclosure: Non corrosive NEMA 1.
• For additional tripper pairs, order part number STPIN.

• Dial: 24 Hour, 2 ON and 2 OFF trippers.
• Switch Rating: 40 amps resistive or tungsten, 1000 VA pilot duty, 2 hp at 120 volts and 5 hp at 240 volts.
• Operations: Up to 10 ON/OFF operations per 24 hours. With manual ON/OFF switch that allows circuit to be hand operated without disturbing the scheduled setting.
• Minimum Setting: 1 hour between ON/OFF, 2 hours between OFF/ON.
• Enclosure: Non corrosive NEMA 1.
• For additional tripper pairs, order part number STPIN.

Overall Case Dimensions: 7.697"H x 4.4"W x 3.8" D
Pilot Duty: 690 VA @ 120, 208, or 240 VAC
Maximum HP: 2HP @ 120, 208 or 240 VAC
Amperage: 40-Amp Non-Inductive @ 120, 208 or 240 VAC
Pressure Terminated: Yes
Time Initiated Temperature: Yes
Time Initiated/Time Terminated: No

Overall Case Dimensions: 7.697"H x 4.4"W x 3.8" D
Pilot Duty: 690 VA @ 120, 208, or 240 VAC
Maximum HP: 2HP @ 120, 208 or 240 VAC
Amperage: 40-Amp Non-Inductive @ 120, 208 or 240 VAC
Pressure Terminated: No
Time Initiated Temperature: No
Time Initiated/Time Terminated: Yes

• Dial: 24 Hour, 2 ON and 2 OFF trippers.
• Switch Rating: 40 amps resistive or tungsten, 1000 VA pilot duty, 2 hp at 120 volts and 5 hp at 240 volts.
• Operations: Up to 10 ON/OFF operations per 24 hours. With manual ON/OFF switch that allows circuit to be hand operated without disturbing the scheduled setting.
• Minimum Setting: 1 hour between ON/OFF, 2 hours between OFF/ON.
• Enclosure: Non corrosive NEMA 1.
• For additional tripper pairs, order part number STPIN.

• Dial: 24 Hour, 2 ON and 2 OFF trippers.
• Switch Rating: 40 amps resistive or tungsten, 1000 VA pilot duty, 2 hp at 120 volts and 5 hp at 240 volts.
• Operations: Up to 10 ON/OFF operations per 24 hours. With manual ON/OFF switch that allows circuit to be hand operated without disturbing the scheduled setting.
• Minimum Setting: 1 hour between ON/OFF, 2 hours between OFF/ON.
• Enclosure: Non corrosive NEMA 1.
• For additional tripper pairs, order part number STPIN.

Solid State Lockout Relay - 18-30 VAC

Delay On Make Timers - Ideal For Compressor Staging - 18-30 VAC

Delay On Make Timers - Ideal For Compressor Staging - 18-30 VAC - 5 minute delay

Delay On Make Timers - Ideal For Compressor Staging - 18-240 VAC

Delay On Make Timers - Ideal For Compressor Staging. Control: 18-240 VAC, 1 amp, 10 amp inrush, 40 mA holding current, Switch-settable delays, range 1 to 1,023 sec.,  Voltage drop: 2.5V @1amp

ALLTEMP 24-ICM104 - Delay On Make Timers - Ideal For Compressor Staging - Control: 18-30 VAC.- Output:N.O. 20 amps @ 240 VAC. N.C. 10 amps @ 240 VAC. SPDT, 1 form C. Knob-adjustable time delays 10 to 1,000 sec. 40 mA holding current.

Delay On Make Timers - Ideal For Compressor Staging - 18-30VAC/ VDC

Delay On Make Timers - Ideal For Compressor Staging - 24-240 V

Delay On Make Timers - Ideal For Compressor Staging - 18-30 VAC - 3 minute delay - 6" wire leads