Solid State Components

Overall Case Dimensions: 7.697"H x 4.4"W x 3.8" D
Pilot Duty: 690 VA @ 120, 208, or 240 VAC
Maximum HP: 2HP @ 120, 208 or 240 VAC
Amperage: 40-Amp Non-Inductive @ 120, 208 or 240 VAC
Pressure Terminated: No
Time Initiated Temperature: No
Time Initiated/Time Terminated: Yes

Overall Case Dimensions: 7.697"H x 4.4"W x 3.8" D
Pilot Duty: 690 VA @ 120, 208, or 240 VAC
Maximum HP: 2HP @ 120, 208 or 240 VAC
Amperage: 40-Amp Non-Inductive @ 120, 208 or 240 VAC
Pressure Terminated: Yes
Time Initiated Temperature: Yes
Time Initiated/Time Terminated: No

Overall Case Dimensions: 7.697"H x 4.4"W x 3.8" D
Pilot Duty: 690 VA @ 120, 208, or 240 VAC
Maximum Hp: 2Hp @ 120, 208 or 240 VAC
Amperage: 40-Amp Non-Inductive @ 120, 208 or 240 VAC
Pressure Terminated: Yes
Time Initiated Temperature: Yes
Time Initiated/Time Terminated: No

Overall Case Dimensions: 7.697"H x 4.4"W x 3.8" D
Pilot Duty: 690 VA @ 120, 208, or 240 VAC
Maximum HP: 2HP @ 120, 208 or 240 VAC
Amperage: 40-Amp Non-Inductive @ 120, 208 or 240 VAC
Pressure Terminated: Yes
Time Initiated Temperature: Yes
Time Initiated/Time Terminated: No

Overall Case Dimensions: 7.697"H x 4.4"W x 3.8" D
Pilot Duty: 690 VA @ 120, 208, or 240 VAC
Maximum HP: 2HP @ 120, 208 or 240 VAC
Amperage: 40-Amp Non-Inductive @ 120, 208 or 240 VAC
Pressure Terminated: No
Time Initiated Temperature: No
Time Initiated/Time Terminated: Yes

• Dial: 24 Hour, 2 ON and 2 OFF trippers.
• Switch Rating: 40 amps resistive or tungsten, 1000 VA pilot duty, 2 hp at 120 volts and 5 hp at 240 volts.
• Operations: Up to 10 ON/OFF operations per 24 hours. With manual ON/OFF switch that allows circuit to be hand operated without disturbing the scheduled setting.
• Minimum Setting: 1 hour between ON/OFF, 2 hours between OFF/ON.
• Enclosure: Non corrosive NEMA 1.
• For additional tripper pairs, order part number STPIN.

• Dial: 24 Hour, 2 ON and 2 OFF trippers.
• Switch Rating: 40 amps resistive or tungsten, 1000 VA pilot duty, 2 hp at 120 volts and 5 hp at 240 volts.
• Operations: Up to 10 ON/OFF operations per 24 hours. With manual ON/OFF switch that allows circuit to be hand operated without disturbing the scheduled setting.
• Minimum Setting: 1 hour between ON/OFF, 2 hours between OFF/ON.
• Enclosure: Non corrosive NEMA 1.
• For additional tripper pairs, order part number STPIN.

120 Coil Voltage - 2000 Coil Resistance DC OHMS ±10% - 33 Nominal Current MA - 4 Nominal VA Sealed - 4 Inrush VA

120 VAC Start relay for 1/20 HP to 1/3 HP compressors. Can be used on refrigeration systems with and without run capacitors. This is a direct replacement for most two terminal PTC relays - Use OL series overloads with IC series, PO series and UR115 - 2 Compressor connection