Carlo Gavazzi ICS05S23F08M5NC - Miniaturized Inductive Proximity Sensor - Short Threaded Barrel Housing Diameter 5mm - Thread Length of 23mm - Sensing Distance 0.8mm - Plug Connection - NPN Output - Normally Closed

Description
The IBS04 and ICS05 series represent the optimal solution for industrial automation equipment in applications where space is limited, including tool-selection, robotic position-sensing and control of micro-mechanisms. The advanced electronics is enclosed in a robust stainless steel housing. The availability of the M8-plug and 2m-PVC cable connection allow flexible mounting.
On-board IO-Link communication opens up many possibilities, such as easy configuration and setup of the devices and advanced parameter setting.

Benefits
• A complete family. Available in Ø4 and M5 male thread robust stainless steel housings with an operating distance of 0.8 to 1.3 mm.
• High speed detection. IBS04 and ICS05 inductive proximity sensors can reach an operating frequency of up to 6 kHz.
• Easy to install. The active face can be installed flush with the surrounding area. The user can choose between 2 m PVC cable and M8-disconnect plug versions.
• High precision. The onboard advanced microcontroller ensures better stability with respect to environmental influences, with highly reliable repeatable measurements between -25 and +70°C.
• Easy customization to specific OEM requests: different cable lengths and materials, special labelling, customized pig-tail solutions with special cables and connectors are possible on request.

Only for IO-Link sensors
• The output can be operated either as a switching output or in IO-Link mode.
• Fully configurable via IO-Link v1.1. Electrical outputs can be configured as PNP/NPN/Push-pull, normally open or normally closed.
• Timer functions can be set, such as switch-on and switch-off delay
• Adjustable sensing distance and hysteresis: sensing distance can be set to 62% or 100% of the maximum sensing distance
• Temperature monitoring: over or under-run temperature alarms can be set

Applications
• Non contact detection of metal objects in general position-sensing and presence-sensing in industrial applications
• Particularly suitable for rotational speed monitoring thanks to the high operating frequency

Main functions
Integrated diagnostic function with flashing LED in the event of a short circuit or overload

IO-Link sensors
• The devices can be operated in IO-Link mode once connected to an IO-Link master, or in standard I/O mode.
• In IO-Link mode the switching signals of the sensor are made available in the process data via the IO-Link interface.
• Several sensor functions can be set via the IO-Link interface:
► Adjustable switching distance: 62% or 100% of the maximum switching distance.
► Adjustable hysteresis: standard or increased value.
► Divider function: the sensor gives a signal after a specified number of actuation pulses has been reached.
► Switch-on delay: the switching pulse is generated after the sensor actuation.
► Switch-off delay: the generation of the switch signal is delayed by the set time after sensor actuation.
► Temperature error: temperature is out of specifications.
► Temperature over-run and under-run: temperature is out of the limits defined by the user.