Additional Information
| Stock Code | ICS08L45F20M5IO |
|---|---|
| Brand | Carlo Gavazzi |
| Voltage (V) | 10 to 30 VDC (ripple included) |
| Sensor Housing | 8mm |
| Sensor Sensing | Inductive Proximity |
| Sensor Range | 2 mm |
| Sensor Output | PNP, NPN or Push-Pull |
| Sensor Switching | N.O. or N.C. |
| Sensor Connection | Plug |
| Sensor Plug Style | M8 X 1 Quick Disconnect, 3 Pin, Male Connector |
| IP Rating | IP67 |
| Mounting | Flush |
| Start Temp. (Min) | -25°C (-13°F) |
| Start Temp. (Max) | +80°C (+176°F) |
| Material | Housing: stainless steel AISI304; Front cap: Grey thermoplastic polyester |
| UL Listed | CE, cULus, CSA |
Description
ICS08 series represents the optimal solution for industrial automation equipment in applications where space is limited, but long switching distance is needed, including tool-selection and textile machines. The advanced electronics is encapsulated in a robust stainless steel housing. The availability of the M8-plug and 2m-PVC cable connection in short or long housing construction allows flexible mounting.
On-board IO-Link communication opens up many possibilities, such as easy configuration and setup of the devices and advanced parameter setting.
Benefits
• A complete family. Available in M8 male thread robust stainless steel housings with an operating distance of 2 to 4 mm.
• Easy to install. Both flush and non-flush construction are available. The user can choose between short and long body housings in 2 m PVC cable or M8-disconnect plug versions.
• High precision. The onboard advanced microcontroller ensures better stability with respect to environmental influences, with highly repeatable measurements between -25 and +80°C.
• Easy customization to specific OEM requests: different cable lengths and materials, special labelling, customized pig-tail solutions with special cables and connectors are possible on request.
Only for IO-Link sensors
• The output can be operated either as a switching output or in IO-Link mode.
• Fully configurable via IO-Link v1.1. Electrical outputs can be configured as PNP/NPN/Push-pull, normally open or normally closed.
• Timer functions can be set, such as switch-on and switch-off delay
• Adjustable sensing distance and hysteresis: sensing distance can be set to 50% or 100% of the maximum sensing distance
• Temperature monitoring: over or under-run temperature alarms can be set
Applications
• Non contact detection of metal objects in general position-sensing and presence-sensing in industrial applications
• Particularly suitable for rotational speed monitoring thanks to the high operating frequency
Main functions
• Integrated diagnostic function with flashing LED in the event of a short circuit or overload
IO-Link sensors
• The devices can be operated in IO-Link mode once connected to an IO-Link master, or in standard I/O mode.
• In IO-Link mode the switching signals of the sensor are made available in the process data via the IO-Link interface.
• Several sensor functions can be set via the IO-Link interface:
► Adjustable switching distance: 50% or 100% of the maximum switching distance.
► Adjustable hysteresis: standard or increased value.
► Divider function: the sensor gives a signal after a specified number of actuation pulses has been
reached.
► Switch-on delay: the switching pulse is generated after the sensor actuation.
► Switch-off delay: the generation of the switch signal is delayed by the set time after sensor actuation.
► Temperature error: temperature is out of specifications.
► Temperature over-run and under-run: temperature is out of the limits defined by the user.
$258.00
|
$196.00
|
$164.00
|
$62.00
|
$55.80
|
$107.00
|
$78.00
|
$102.00
|
