Leviton IPS15-1LZ 1800-Watt Incandescent, 600-Watt LED/CFL Occupancy Sensor (Auto ON/Auto OFF), Single Pole or 3-Way

Brand Features

Leviton's IPV15/IPS15 Universal Vacancy and Occupancy Sensors combine state-of-the-art technology with new aesthetics to provide optimal management of lighting and motor loads and a choice of either Manual-ON (Vacancy Sensor) or Automatic-ON (Occupancy Sensor) switching. These energy-saving sensors are engineered to control LED, CFL, Electronic and Magnetic Low Voltage and incandescent loads and ensure that lights/motors will turn ON manually (vacancy) or automatically (occupancy) and turn OFF automatically when motion is no longer detected within the covered range. Designed to fit in a standard wallbox, both devices offer 180° Field of View and 900 sq. ft. of coverage.

Both the IPV15 and the IPS15 have screw terminals for easy installation and require a neutral wire for connection. The devices feature a time delay setting which allows users the option to delay the lights/motor load from switching off for 30 seconds, 5 minutes, 15 minutes or 30 minutes. For example, closet lighting would ideally be set to turn OFF in 30 seconds while a bathroom fan may be set to turn OFF 15 minutes after the space is vacated.

Features and Benefits:

• Universal Light Control - Switches Incandescent, CFL, LED and Fluorescent Ballasts using relay technology
• Automatic-ON/Automatic OFF operation for seamless energy management
• Low-Profile design eliminates an obtrusive "scanning device" look. Elegant styling compliments any interior and coordinates with Leviton's popular line of Decora® wiring devices
• 180 degree field-of-view provides approximately 900 square feet of coverage suitable for bathrooms, basements, garages, utility rooms and a variety of other residential areas
• Convenient push-button provides Manual OFF light switching at any time
• Segmented lens provides optimum sensitivity and performance. It is designed with an extensive "minor motion" area where even slight body movements will be detected
• Four optional manual adjustments for delayed-OFF time settings maximize energy savings: 30 seconds (for walking test), 10 minutes, 20 minutes and 30 minutes
• LED Indicator Light flashes when sensor detects motion to verify detection is active
• Unit can be used for 120V lighting. Compatibile with both electronic and magnetic ballasts or 1/2 HP loads
• Relay switches at zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
• Fits in standard wallbox; Single Pole or Multi Location with IPV0R
• Neutral wire required
• Five-Year Limited warranty.