Juno JFXDRV 120VAC MLV 60W M30 - JFX Line Voltage Dimmable Driver - 120 VAC - 60 Watts

JFX Drivers Specifications

Product Features
Power JFX tapelight with multiple driver options to best meet project requirements. MLV drivers in 20, 40, 60, and 96 watts are ideal for static tapelight applications with On/Off and/or line voltage dimming. The CLV drivers in 60 and 100 watts providing constant, non dimming output which provides a perfect solution when combined with the RGBW RF or DMX control solutions for RGBW applications. And the L3DA, LTEA, and L3D0 drivers are available for deep dimming and Title 24 applications. 

Mechanical Construction
All junction boxes included with JFX DRV are designed to be NEC compliant. Each are constructed using 18GA cold-rolled steel and powder coated. The black finish helps to easily conceal the unit and provides additional protection against atmospheric conditions. All junction boxes come with conveniently located input and output power knockouts from 1" to 1.25" sizes to be highly adaptable for various wiring layouts. Ventilation holes and mounting orientation is provided to ensure proper thermal management and air handling capabilities. Each box comes with a 1" romex-style connector clamp.

Electrical Specification
JFXDVR drivers operate at 120VAC or MVOLT ( 120/277VAC ) @ 50/60Hz depending on the driver option selected. All drivers provide a constant output of 24VDC, up to 100W of total system power. Ambient operating temperatures vary based on driver selected. Drivers should be loaded to 80% maximum (i.e. 32W for 40W model). Drivers should be loaded to minimum 20% (i.e. 8W for 40W model). Refer to driver specification table below for details.

Installation
JFX DRV junction boxes are designed for multiple installation settings. Typical installation locations include, but are not limited to, behind wall, electrical rooms, over cabinet, and more. It is recommended the junction boxes are not installed in an insulation-contact setting or installed within 2 inches of a cabinet wall. Do no install in a compartment smaller than 15.25" X 7.75" X 3.75". All boxes come with mounting hole provisions to be installed on a flat surface such as drywall, studs, or other structural members.

Certifications
UL recognized component for U.S. and Canada. Listed for damp locations.