Skip to Main Content »

Search Site
Your shopping cart is empty

All Prices are in Canadian Dollars

Lithonia Lighting KADRD LED 40C 1000 40K R3 MVOLT DDBXD - KAD LED Retrofit Kit - 40 LEDs - 1000 mA - Type III - 120-277V - 141W - 4000K Cool White - 14890 Lumens - Dark Bronze Finish

Be the first to review this product

Lithonia Lighting KADRD LED 40C 1000 40K R3 MVOLT DDBXD - KAD LED Retrofit Kit - 40 LEDs - 1000 mA - Type III - 120-277V - 141W - 4000K Cool White - 14890 Lumens - Dark Bronze Finish

  Is DLC Approved

Availability: Temporarily out of stock, Please email us or call 1-855-296-9508 for further information.

$694.96

Lithonia Lighting KADRD LED 40C 1000 40K R3 MVOLT DDBXD - KAD LED Retrofit Kit - 40 LEDs - 1000 mA - Type III - 120-277V - 141W - 4000K Cool White - 14890 Lumens - Dark Bronze Finish

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Additional Information

Brochures & Specific Sheets


Stock Code KADRD LED 40C 1000 40K R3 MVOLT DDBXD
Brand Lithonia Lighting
Fixture Type Outdoor
Voltage (V) 120-277 V
Wattage (w) 141W
Amperage 1000 mA
Bulb Type LED
Lumens (Initial) 14890 Lumens
Color Temperature (K) 4000K Cool White
Length (in) 17-1/2”
Width (in) 17-1/2”
Height (in) 7-1/8”
Finish Dark Bronze Finish
Weight (lb.) 13 lbs.
UPC 888791750843
Life Hours 100,000 hours
UL Listed CSA
Warranty 5-year limited warranty
Is DLC Approved Yes

KADRD LED

LED Retrofit Kit

The Contour® Series luminaires offer traditional square dayforms with softened edges for a versatile look that complements many applications. The KADRD LED retrofits any existing 100 - 400W metal halide or high pressure sodium KAD into a high-performance LED luminaire, while realizing typical energy savings up to 65% with expected service life up to 100,000 hours. The KADRD LED retrofit door simply replaces the existing KAD door containing the glass lens and installs in minutes.

FEATURES:

INTENDED USE

The energy savings and long life of the KADRD LED area luminaire make it a reliable choice for illuminating streets, walkways, parking lots, and surrounding areas.

CONSTRUCTION

Single-piece die-cast, aluminum housing with contoured edges has a 0.12” nominal wall thickness. Die-cast door frame is fully gasketed with one-piece tubular silicone.

FINISH

Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling.

OPTICS

Precision-molded refractive acrylic lenses are available in four distributions. Light engines are available in standard 4000K or optional 3000K or 5000K (70 CRI) configurations.

ELECTRICAL

Light engine consists of high-efficacy LEDs mounted to a metal-core circuit board and aluminum heat sink, ensuring optimal thermal management and long life. Class 1 electronic driver has a power factor >90%, THD <20%, and has an expected life of 100,000 hours with <1% failure rate. Easily-serviceable surge protection device meets a minimum Category C Low (per ANSI/IEEE C62.41.2).

INSTALLATION

Retrofit only--mounts directly on existing KAD or KAD-LED housing.

LISTINGS

CSA certified to U.S. and Canadian standards. Luminaire is IP65 rated. Rated for -40°C minimum ambient. DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified.

WARRANTY

5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.

Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.