Additional Information
Stock Code | KADRD LED 40C 1000 40K R5 MVOLT DDBXD |
---|---|
Brand | Lithonia Lighting |
Fixture Type | Outdoor |
Voltage (V) | 120-277 V |
Wattage (w) | 141W |
Amperage | 1000 mA |
Bulb Type | LED |
Lumens (Initial) | 15821 Lumens |
Color Temperature (K) | 4000K Cool White |
Length (in) | 17-1/2” |
Width (in) | 17-1/2” |
Height (in) | 7-1/8” |
Finish | Dark Bronze Finish |
Weight (lb.) | 13 lbs. |
UPC | 888791940909 |
Life Hours | 100,000 hours |
UL Listed | CSA |
Warranty | 5-year limited warranty |
Is DLC Approved | Yes |
KADRD LED
LED Retrofit Kit
The Contour® Series luminaires offer traditional square dayforms with softened edges for a versatile look that complements many applications. The KADRD LED retrofits any existing 100 - 400W metal halide or high pressure sodium KAD into a high-performance LED luminaire, while realizing typical energy savings up to 65% with expected service life up to 100,000 hours. The KADRD LED retrofit door simply replaces the existing KAD door containing the glass lens and installs in minutes.
FEATURES:
INTENDED USE
The energy savings and long life of the KADRD LED area luminaire make it a reliable choice for illuminating streets, walkways, parking lots, and surrounding areas.
CONSTRUCTION
Single-piece die-cast, aluminum housing with contoured edges has a 0.12” nominal wall thickness. Die-cast door frame is fully gasketed with one-piece tubular silicone.
FINISH
Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling.
OPTICS
Precision-molded refractive acrylic lenses are available in four distributions. Light engines are available in standard 4000K or optional 3000K or 5000K (70 CRI) configurations.
ELECTRICAL
Light engine consists of high-efficacy LEDs mounted to a metal-core circuit board and aluminum heat sink, ensuring optimal thermal management and long life. Class 1 electronic driver has a power factor >90%, THD <20%, and has an expected life of 100,000 hours with <1% failure rate. Easily-serviceable surge protection device meets a minimum Category C Low (per ANSI/IEEE C62.41.2).
INSTALLATION
Retrofit only--mounts directly on existing KAD or KAD-LED housing.
LISTINGS
CSA certified to U.S. and Canadian standards. Luminaire is IP65 rated. Rated for -40°C minimum ambient. DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified.
WARRANTY
5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.