OUELLET KIT-OTM-FIX - Floor Heating Cable On Mat - Repair Kit

Series OTM

Floor Heating Cable on Mat

The floor heating cable on mat provides comfort and well-being through radiant heating. By heating the floor itself instead of the surrounding air, it provides indirect heat that radiates from the floor up and is absorbed by surrounding objects,

The floor heating cable on mat produces enveloping heat that is also clean, cost-effective, uniform, and constant.

• Prefabricated on adhesive mesh mat for ease of installation.
• Ideal for large areas and concrete subfloors.
• Simply cut and twist the mat to cover any shape area. Never cut or shorten the heating cable.
• 12W/ sq. ft.
• 25-year warranty on the heating cable.

Features

Voltage

• 120V, 240/208V, 1-phase.

Cold lead length

• 10’ (3 m).

Control

• Two types of control method possible (see instruction manual for details):

- Surface heating control with electronic thermostat in floor mode (F) and temperature sensor.

- Ambient heating control with electronic thermostat in ambient mode with floor limit (A or AF) and temperature sensor.

Note: A ground fault circuit interrupter (GFCI) must be used with this heating device unless exempted by the applicable national and/or local electrical code for the area of installation.

Included materials

• 15’ (4.6 m) temperature sensor.

• Measurements table label (to be placed in electrical panel).

Installation

• Never cut or shorten the heating cable.

• For indoor applications only.

• On concrete slab or plywood subfloor.

Warranty

• 25-year warranty on the heating cable.

Application

• Kitchen, bathroom, entrance way, family room, living room.

Construction

• Heating cable made of a twin conductor fastened to an adhesive fibreglass mat for a simpler and faster installation with negligible magnetic field.

Watt density

• 12W/sq. ft. (130W/sq. m), 3” (76 mm) spacing.

Dimension

• Mats of 16 in. (0.41 m) in width offered in several lengths.