OUELLET KIT-SA-FI-230 - Kit of 2 Filters For 230R Air Exchanger

Featrures

Air flow and performance
• Fully adjustable air flow (230 cfm @ 0 in.w.g.).
• 68% sensible recovery effectiveness at 0 °C (32 °F) 30 L/s, 58% sensible recovery effectiveness at -25 °C (-13 °F) 26 L/s.
• Recirculation defrosts.

Voltage
• 120V, 60Hz, 0.8A.

Benefit
• Reduce heating demand in winter and cooling demand in summer.
• Whisper-quiet: factory-calibrated and balanced.
• Easy installation and maintenance.
• Designed and manufactured in Canada to operate in variable climatic conditions

Construction
• Door and housing in corrosion-resistant galvanized steel, 24-gauge, pre-painted neutral white.
• Convenient, screwless hinged door.
• Ultra-thin: 12 in. (305 mm).
• No drain required.
• Lightweight for ease of installation: 43 lb (19.5 kg).
• Port size: 6 in. (152 mm).
• MERV 8 charcoal polyester filters.
• Side Port model only.
• Reverse air flow configuration available as a factory installed option (-R). For further explanation, please refer to the document Normal and Reverse.
• Backdraft damper required on fresh air inlet (not supplied)

Motor
• Energy-efficient, sealed European motor with closed housing and automatic reset thermal protection.
• Balancing without flow keys. 100% electronic adjustment. Pressure ports integrated into the door for precise, easy balancing.

Energy recovery core
• High-efficiency 100% polymer core, extremely durable.
• Recovers both latent and sensible energy. (Heat and Humidity).
• Meets or exceeds ASHRAE 90.1-2010.
• Washable in soapy water to recover its full effectiveness without deterioration or contamination.
• Antimicrobial protection - ISO846.
• Avoid virus transfer - ASTM F-1671 tested.
• Zero crossflow contamination - Certified according to AHRI 1060.
• UL94 HB Flammability tested.

Control/timer
• 2 control choices available:
- Optional Decora-style wall-mounted control/timer (SA-LT15). INTERMITENT (20-40) – CONTINUOUS – OFF – Timer (20-40-60 minutes).
- Optional digital Decora-style wall-mounted control/timer (SA-LCD15). INTERMITENT (20-40) – CONTINUOUS – Humidity – Recirculation OFF.

Installation
• Can be ceiling-mounted or suspended.
• Easily installed in the ceiling void or just below the fire-rated ceiling.
• Set of nylon suspension straps included for installation.
• Steel mounting plate for Top Port models only, available as an option(SA-P5R).
• Furnace interconnect plug connector factory installed.

Setting
• Balance the unit using the supplied instruction named: Balancing.
• All the installer needs are the required flow rates, a manometer, and 5 minutes to adjust and balance the system.
• Simply specify the air flow rates for LOW SPEED and HIGH SPEED.
• The static pressure of the system should ideally be less than or equal to the static pressure indicated by the graph for HIGH SPEED.
• You don't have to worry about static pressure to limit air flow or adding flow keys as other devices. All you must do is provide ducting that doesn't limit maximum flow, and the unit's adjustments will allow you to finetune flow rates.

Warranty
• Motor 5-year. Other parts except filters and pre-filters 1-year.

Application
• The ideal solution for high-rise apartments and small to medium-size homes.
• Purifies the air by expelling many pollutants, dust, and allergens to the outside, while ensuring an equivalent supply of fresh air in the home.