Lampholder

Etlin Daniels CFGU24-475-RING - RING FOR 475 SOCKET - GU-24 - Outer Threaded Body - Push-in Wire Terminals - 250W - 600V

For 7/9W Twin Tube Lamps. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin, stripped 7⁄16”. Snap-in mount into 0.025-0.040” (0.6 - 1 mm) panel thickness. Each wiring port accepts 2 wires for easy harness wiring, no extra jumpers or wire nuts to assemble - Rated 75W, 600V

For 5/7/9W CFL Twin Tube Lamps. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin or solder dipped wire, stripped 7⁄16”. Four holes on mounting plate for fast, easy installation. Each wiring port accepts 2 wires for easy harness wiring - Rated 75W, 600V

For 13W CFL Twin or Quad Tube Lamps. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin or solder dipped wire, stripped 7⁄16”. Bottom snap-in mount into panel of 0.030 – 0.067” (0.8 – 1.7 mm) thickness - Two wire terminals per wire port - Rated 75W, 600V

For 7/9W Twin Tube CFL Lamps. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin, stripped 7⁄16”. Each wiring port accepts 2 wires for easy harness wiring, no extra jumpers or wire nuts to assemble - Rated 75W, 600V

For 13W CFL Twin or Quad Tube Lamps. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin or solder dipped wire, stripped 7⁄16”. Four holes on mounting plate for fast, easy installation. Each wiring port accepts 2 wires for easy harness wiring - Rated 75W, 600V

For 5/7/9W CFL Twin Tube Lamps.  Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin or solder dipped wire, stripped 7⁄16”. Bottom snap-in mount into panel of 0.030 – 0.067” (0.8 – 1.7 mm) thickness. Two wire terminals per wire port - Rated 75W, 600V

For 13W CFL Twin or Quad Tube Lamps. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin, stripped 7⁄16”. Each wiring port accepts 2 wires for easy harness wiring, no extra jumpers or wire nuts to assemble. Horizontal Bottom Screw Mount - 75W 600V

For 13W CFL Twin or Quad Tube Lamps. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin, stripped 7⁄16”. Snap-in mount into 0.025-0.040” (0.6 - 1 mm) panel thickness. Each wiring port accepts 2 wires for easy harness wiring, no extra jumpers or wire nuts to assemble. Rated 75W, 600V

Non-keyed Accepts All Lamp Wattages, Stock one item instead of six. For 13W, 18W, 26W, 32W, 42W, 4 Pin Quad Lamps, Electronic Ballast in G24 and GX24 Base. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin, stripped 7⁄16” . Each wiring port accepts 2 wires for easy harness wiring. Four holes on base for secure mounting - Rated 75W, 600V. 

* This item has been discontinued. We will dispatch CFGX24-Q instead

For 13W, 18W, 26W 2 Pin Quad Lamps in G24 and GX24 Base. Non-keyed Accepts All Lamp Wattages, Stock One Item Instead of Three. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin, stripped 7⁄16”. Each wiring port accepts 2 wires for easy harness wiring. Four holes on base for secure mounting.

Etlin Daniels CF26G24-Q3 - 26W Keyed For 4 Pin Quad Lamps, Electronics Ballast in G24 or GX24 Base. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin, stripped 7⁄16”. Each wiring port accepts 2 wires for easy harness wiring. Four holes on base for secure mounting - Rated 75W, 600V

For 4 Pin 13W Quad Lamp, Electronics Ballasted in G24 or GX24 Base. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin, stripped 7⁄16”.  Each wiring port accepts 2 wires for easy harness wiring. Four holes on base for secure mounting - Rated 75W, 600V

For 4 Pin Quad Lamps 42W G24 and GX2 Base, Electronica Ballasted. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin, stripped 7⁄16”.  Each wiring port accepts 2 wires for easy harness wiring. Four holes on base for secure mounting - Rated 75W, 600V

For 4 Pin 18W Quad Lamps, Electronically Ballasted, in G24 or GX24 Base. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin, stripped 7⁄16” - Each wiring port accepts 2 wires for easy harness wiring. Four holes on base for secure mounting - Rated 75W, 600V

13W 4 Pin Horizontal 2 Hole Screw Mount Compact Fluorescent Lamp Socket. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin or solder dipped wire, stripped 3⁄8”. Two wire ports per terminal to speed harness wiring.

Etlin Daniels FLG10Q-FL - 4 PIN FLOATING LAMPHOLDER NO MOUNTING - 120W - 600V

White Thermoplastic Body - Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin or solder dipped wire, stripped 7⁄16” - Twin wireways for easy harness wiring. - Wires from bottom of lampholder - Socket has 2 mounting ears to screw down to panel - Rated 120W, 600V - UL Listed & CSA Certified

GU-24 bi-pin twist-lock configuration holds lamp or ballast in place. Quickwire terminals accept 18 AWG solid or bonded copper wire, stripped 3/8”. Wires from the back of the lampholder. Push in wire terminal models are rated 250W 600V