Lampholder

13W 4 Pin Horizontal 2 Hole Screw Mount Compact Fluorescent Lamp Socket. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin or solder dipped wire, stripped 3⁄8”. Two wire ports per terminal to speed harness wiring.

For 4 pin 18W Electronic Ballasted Quad or Triple Tube Lamps. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin or solder dipped wire, stripped 3⁄8” - Two wire ports per terminal to speed harness wiring. Two hole screw mount on base plate

For 4 Pin Electronic Ballasted Quad or Triple Tube 42W CFL Lamps. Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin or solder dipped wire, stripped 3⁄8”. Two wire ports per terminal to speed harness wiring. Two hole screw mount on base plate - Rated 75W, 600V

Quick connect push-in wire terminals for 18 AWG solid or bonded Copper wire, stripped 7/16”.  Screw mounts into (2) .177” holes in panel. Cutting screws go into (2) .125” holes in socket. Two wire ports per terminal - Rated 75W, 600V

2G11 Horizontal Screw Mount Using 2 screw holes located in base legs. Quick connect push-in wire terminals for 18 AWG solid or Twist & Tin or solder dipped wire, stripped 3/8”.  Two wire ports per terminal for easier wiring of multiple lampholder circuits - 75W, 600V

Snap-in mount using 2 holes into a 0.025 x 0.040” (0.6 x 1 mm) panel thickness. Quick connect push-in wire terminals for 18 AWG solid or Twist & Tin or solder dipped wire, stripped 3/8”.  Two wire ports per terminal for easier wiring of multiple lampholder circuits - 75W, 600V.

Lamp position is 90° or vertical to the mounting plane. Quick connect push-in wire terminals for 18 AWG solid or Twist & Tin or solder dipped wire, stripped 3/8”. Snap-in mount into 2 holes into a 0.025 x 0.040” (0.6 x 1 mm) panel thickness. Two wire ports per terminal for easier wiring of multiple lampholder circuits - 75W, 600V

White Thermoplastic Body - Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin or solder dipped wire, stripped 7⁄16” - Twin wireways for easy harness wiring. - Wires from bottom of lampholder - Socket has 2 mounting ears to screw down to panel - Rated 120W, 600V - UL Listed & CSA Certified

Etlin Daniels FLG10Q-FL - 4 PIN FLOATING LAMPHOLDER NO MOUNTING - 120W - 600V

Medium to Miniature Base - T5 Bi-Pin - Standard Fluorescent Lampholder - Long T-8 to T-5 Adapter - Slide-On - Lamp-Lock - Quickwire 18AWG Solid or Stranded Tinned - White

T-8 to T-5 Bi-Pin Adaptor - Standard Fluorescent Lampholder - Short Adaptor - Slide-On - Lamp-Lock - 120W-600V - Quickwire 18AWG Solid or Stranded Tinned - White

Miniature Base - T5 Bi-Pin - Standard Fluorescent Lampholder - Low Profile - Snap-In or Slide-ON - Lamp-Lock - Quickwire 18AWG Solid or Stranded Tinned - White

Miniature Base - T5 Bi-Pin - Standard Fluorescent Lampholder - Low Profile - Snap-In or Slide-ON - Lamp-Lock - Quickwire 18AWG Solid or Stranded Tinned - White With Panel Locator Post

Miniature Base - T5 Bi-Pin - Standard Fluorescent Lampholder - Tall Profile - Snap-In or Slide-ON - Lamp-Lock - Quickwire 18AWG Solid or Stranded Tinned - White

Linear fluorescent lampholder - T5 miniature bi-pin twist-in with lamp-lock - Tall profile - snap-in mounting foot with post - 120W-600V

Medium Base - Bi-Pin - Standard Fluorescent Lampholder - Low Profile - Slide-On - Straight-In Double Edge - Quick-Connect 18AWG Solid or Str. Tinned - White

Medium Base - Bi-Pin - Standard Fluorescent Lampholder - U-Shaped Lamp - Slide-On Self- Aligning - Straight-In Double Edge - Quick-Connect 18AWG Solid or Str. Tinned - White

Medium Base - Bi-Pin - Linear Fluorescent Lampholder - Low Profile - Slide-On - Turn-Type - Quick-Connect 18AWG Solid or Str. Tinned - White

Medium Base - Bi-Pin - Standard Fluorescent Lampholder - Low Profile, Slide-On - Turn-Type - Disconnect - Quick-Connect 18AWG Solid or Str. Tinned - White