Bulbs & Tubes

Focused beam for optical applicationsOnly for use in approved enclosed halogen fixtures2-Pin Base - GX5.350mm Dichroic coated reflector

Focused beam for optical applicationsOnly for use in approved enclosed halogen fixtures2-Pin Base - GX5.350mm Dichroic coated reflector

List Price is for Whole Pack of 10 Pieces

Only for use in approved enclosed halogen fixtures50mm Dichroic coated reflectorLine Voltage - 120VoltsOperate Base UpIntermediate Screw Base - E17

List Price is for Whole Pack of 12 Pieces

Focused beam for optical applicationsOnly for use in approved enclosed halogen fixturesOval 2-Pin Base - GY5.350mm Dichroic coated reflectorOperated Base Down to Horizontal

List Price is for Whole Pack of 10 Pieces

Only for use in approved enclosed halogen fixtures50mm Dichroic coated reflectorLine Voltage - 120VoltsOperate Base UpIntermediate Screw Base - E26

List Price is for Whole Pack of 10 Pieces

Focused beam for optical applicationsOnly for use in approved enclosed halogen fixtures2-Pin Base - GX5.350mm Dichroic coated reflector

List Price is for Whole Pack of 10 Pieces

Focused beam for optical applicationsOnly for use in approved enclosed halogen fixtures2-Pin Base - GX5.350mm Dichroic coated reflector

List Price is for Whole Pack of 10 Pieces

Ushio USH-102DH is a 100 watt mercury short arc high illuminance lamp used for microscope illuminators, lab equipment and UV applications. Specifications include: 5 amps, 0.5mm arc gap, 43mm light center length and a rated life of 200 hours. Ushio's mercury short arc bulbs provide high arc stability and exact positioning. The Ushio USH-102DH bulb is equivalent to the Osram Sylvania HBO103W2.

List Price is for Whole Pack of 20 Pieces

The USHIO USH-102D, Hg 100W is a 100 watt, 20 volt clear glass mercury short arc lamp. This lamp has a 0.5 millimeter arc gap, a light center length of 43 millimeters and a luminous flux of 2200 lumens. Burn position for the USH-102D is vertical plus or minus 15°. USHIO's USH short-arc mercury lamps have a tightly confined plasma discharge, high luminance, and ultra-stable arc making them a good choice for microscopy units, diagnostic and industrial analytical equipment, blood analyzers, optical comparators, and UV curing applications.

List Price is for Whole Pack of 20 Pieces

FBT, JCV30V-150WS, CC-8 Filament, Clear, 6 Hr, Mini Candelabra Base - E10, 5000 Lumens, Universal Burning Position

** Special order item - lead times & minimum quantity requirements may apply / Item spécial sur commande seulement - Délais de livraison et des quantités minimum peuvent s’appliquer

List Price is for Whole Pack of 10 Pieces

100W MHR Metal Halide Lamp with Cold Mirror Reflector, 5200K Daylight Color Temerperature, CRI 72, Average Life 6000 Hours, Ballast ANSI Code M90/E, Base Type: AMP Universal Mate-N-Lok, 3 Channel Plug

ESN, JCV120V-100WGSN2, CC-2V Filament, Clear, 750 Hr, Mini Candelabra Base - E11, 1800 Lumens, Universal Burning Position

List Price is for Whole Pack of 10 Pieces

150W MHR Metal Halide Lamp with Cold Mirror Reflector, 4200K Cool White, CRI 75, Average Life 6000 Hours, Ballast ANSI Code M81/E, Base Type: AMP Universal Mate-N-Lok, 5 Channel Plug

The low-pressure Amalgam lamps achieve 10 times the UV power density of standard low-pressure lamps and 5 times more ozone production while operating at a higher temperature than conventional low-pressure Mercury lamps.

The low-pressure Amalgam lamps achieve 10 times the UV power density of standard low-pressure lamps and 5 times more ozone production while operating at a higher temperature than conventional low-pressure Mercury lamps.

The low-pressure Amalgam lamps achieve 10 times the UV power density of standard low-pressure lamps and 5 times more ozone production while operating at a higher temperature than conventional low-pressure Mercury lamps.

The low-pressure Amalgam lamps achieve 10 times the UV power density of standard low-pressure lamps and 5 times more ozone production while operating at a higher temperature than conventional low-pressure Mercury lamps.

150 Watt-Compact Ceramic Metal Halide Lamps-G12 Base-3000K-12000 Average Life Hours

USHIO MHL Series metal halide lamps contain mercury, scandium and various other metal halogens in an inner bulb that produces a very high light output. As the high temperature of the arc discharge excites the halogenides to evaporate and separate into atoms, the metallic atoms illuminate and release the predetermined target ultraviolet wavelength. The mercury line of 365 nanometers remains present, and although depressed in strength, the combination of these halogenides effect the required ultraviolet wavelengths required for photopolymer, multi-spectrum and diazo processing applications. For the operation of an MHL lamp, bridge-gap ballasts designed specially for metal halide lamps should be used. Bridge-gap ballasts are designed with a higher open circuit secondary and a higher current carrying capacity. A thermal fuse should also be integrated into the ballast.