Lovato LVFSP1W05 - FLOAT SWITCH FOR GREY WATER - PVC CABLE - 5MT LONG

General characteristics

Float switches are used in the automation of electrical equipment, such as: pumps, solenoid valves, alarms, motorised sluice gates, etc. All versions feature an internal changeover contact operated in accordance with the level of liquid where the float is located. The cables used are high-quality and offer excellent mechanical and chemical resistance over time.
The cables are 3x1 type, that is 3 wires with section 1mm2. This allows the user to choose the filling and emptying function during regulator wiring.

Operational characteristics

They are used for the civil and industrial control of levels of grey water, e.g. rainwater, groundwater or cooling water from industry. They are available with PVC and neoprene cables of various lengths.
– Activation angle -45°...+45°
– 130g external counterweight included
– Float casing material: polypropylene
– Cable A05 VV-F3X1 (PVC) available in lengths of 3, 5, 10 and 15m and cable H07 RN-F3X1 (Neoprene) available in lengths of 5, 10, 15 and 20m
– Rated cable diameter: 9mm (PVC and Neoprene)
– Relay with changeover contact 10(8)A 250VAC 50/60Hz
– Maximum installation depth: 30m
– Maximum pressure: 3bar
– Operating temperature: 0…+50°C
– Storage temperature: -20…+70°C
– IEC degree of protection: IP68
– Insulation class: II.

Certifications and compliance

Certifications (pending): TÜV.
Compliant with standards: IEC/EN 60730-1, IEC/EN 60730-2-15..