Additional Information
Stock Code | MMC37-42006 |
---|---|
Brand | Siemens |
Family | 600Y/347V Meter Stacka |
Voltage (V) | 600V |
Amperage | 4 x 2 00A |
Wattage (w) | 4W |
Width (in) | 20.63'' |
Height (in) | 76.25'' |
Depth (in.) | 13.94'' |
Phase | Three Phase |
Sold Separately: | Breaker provision only, breaker must be ordered. |
UL Listed | CSA |
Case Quantity | 1 |
600Y/347V Meter Centre
General Specifications
Siemens 600Y/347V metering line offers an ideal solution for restricted space projects. This metering solution for 600Y/347V applications has been
designed in Canada based on contractors’ feedback. Each meter stack houses features designed with the contractor in mind, to maximize productivity and minimize labour costs
Voltage
600Y/347V AC
Amperage
Horizontal bus bars rated for 1200A max. Vertical bus bars rated for 800A max. Meter socket rated for 200A max.
Short Circuit rating
42,000A RMS symmetrical @ 600V max. when protected by 1200A maximum HRC class L type fuse
Standard
CSA: C22.2 No. 229-M1988.
Certified under file #153416
Service
3-phase 4-wire 600Y/347Vac
Enclosure
Type 1 enclosure. Meter stack comes standard with dripshield and blank end walls (no knockout). Meter stack enclosure, barriers and end plates are manufactured of galvanized steel. Front covers are fabricated of phosphatized steel finished with ASA 61 light grey paint.
Meter Socket Jaws
Meter socket jaws consist of tin plated copper with steel spring reinforced clips for reliable contact pressure. Positive alignment of jaws and stabs is assured by bus straps factory installed.
Sub-Service Breaker
High performance bolt-on circuit breakers can be selected to address site requirements from 70 to 200A. Interrupting ratings up to 25kA combine thermal and magnetic trip elements. Series rating is also available for approved combination up to 42kA when protected by 1200A maximum HRC class L type fuse.
Breaker Provisions
Each 600V meter stack has provision for four 3-pole 200A max bolt-on type FXD6/HFXD6 circuit breaker. Non-interchangeable trip unit breakers must be used for this application. Generous gutter space allows for wiring for top or bottom of the meter module. All sub-service breaker mounting hardware
is provided with each meter stack.
Neutral & Ground Provisions
Each stack includes neutral & ground provisions.
Features
- Robust and compact enclosure standard with dripshield
- Sturdy bussing connections providing durable support for each sub-service breaker
- Breaker and bus bar protection allowing screws recuperation
- Provision to padlock sub-service breaker in the “off” position
- Large wireway separated from meter area for easier connections.
- Trouble-free access to horizontal bars and easy access to cabling area
- Reliable and simple busbar to busbar connections