Leviton ODS10-IQI - Passive Infrared Wall Switch Occupancy Sensor - 180 Degree - 2100 sq. ft. Coverage - Ivory

Leviton ODS10-IQI

Brand Features

The ODS10-IQ uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and automatically switches the lights ON. Lighting will remain ON for the specified time-delay after the sensor motion is detected; an occupant moving through the sensor zones resets the time-delay to keep the lights ON. Once the specified timedelay has expired, the sensor will automatically turn the lights OFF

Features and Benefits

Fits in standard wallbox and replaces single-pole wall switch. Gangable with other units

Low-profile design eliminates obtrusive “scanning-device” look. Elegant Decora wallplates complement any interior for sleek aesthetics; uses Decora wallplates and coordinates with Leviton’s popular line of Decora wiring devices

180° field-of-view provides approximately 2100 square feet of coverage suitable for small offices, conference rooms, classrooms, lounges and a variety of commercial areas

Two dual element PIR sensors used to widen detection range

Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive “minor motion” area where even slight body movements will be detected

Vandal resistant PIR lens

Horizontal field-of-view may be adjusted between 180° and 60° of arc by using integral blinders located on either side of the lens. No masking tape required

Red LED indicator light flashes when sensor detects motion to verify detection is active

Time Delay adjustment for delayed-OFF time settings of 30 seconds (for walking test), 10 minutes, 20 minutes, and 30 minutes. Allows customized adjustments to maximize lamp life and energy savings

Light Sensor Adjustable Ambient Light Override ranges from approximately 2 foot-candles (20 lux) to 500+ foot-candles (5000+ lux) to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings

Light sensor enables the load hold-OFF feature once level has been set

Vacancy confirmation - when the time out expires and the lights turn OFF a 30 second vacancy confirmation exists to turn the lights back ON False detection circuitry

One unit can be used for 120V through 277V lighting. Compatible with both electronic and magnetic ballasts

Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts

Exclusive Leviton H.I.S. Circuitry. Specifically designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service

No neutral design is optional for retrofit applications