ONSALE

Each Pole Full Load 40Amp 690VAC Maximum, Total 4 Poles Normally Open (NO), Control Coil 120Vac, without Auxiliary Contact, Super Quiet Operation, Solid Quailty, Best Value in the 4 Pole 40Amp Contactor Market.

Timing ranges: 0.5 seconds to 300 hours. 12 to 240 VAC/DC supply voltage. Knob selection of timing range and delay type. 8 Amp DPDT contact output. 48 x 48mm housing for front panel or socket mounting. LED indication for replay status and power supply “ON”.

Socket ZPD11XA is required but not included (See Industrial Relays & Bases Flyer) 

Timing ranges: 0.5 seconds to 300 hours. 12 to 240 VAC/DC supply voltage. Knob selection of timing range and timing function. 8 Amp DPDT contact output. 48 x 48mm housing for front panel or socket mounting. LED indication for replay status and power supply “ON”.

Socket ZPD8XA is required but not included (See Industrial Relays & Bases Flyer) 

Carlo Gavazzi Multifunction Timer DMB51CM24, Operates on 24VDC and 24 to 240VAC, Mini-D Compact Housing, Snaps Directly to DIN Rail. 5Amp SPDT contact Output, Timing Ranges from 0.1 second to 100 hours. Split into 7 Sub-ranges.

Universal AC single phase input full range. Can also be used as bi-phase 400VAC. Installation on DIN rail 7.5 or 15mm. PFC as standard. High efficiency up to 90%. Power ready output. Parallel connection feature. Compact dimensions. CE, TÜV, CCC approved and cULus listed. Class I Div 2 Groups A, B, C, D approved.

Universal AC input full range. Installation on DIN rail 7.5 or 15mm. Short circuit protection. PFC as standard. High efficiency. Power ready output. LED indicator for DC power ON. LED indicator for DC low. Parallel connection feature. Compact dimensions. UL, cUL listed and TUV/CE approved

Installation on DIN Rail 7.5 or 15mm. Short circuit protection. PFC standard. High efficiency. Power ready output. LED indicator for DC power ON. LED indicator for DC low. Parallel versions standard. Compact dimensions. UL, cUL listed and TUV/CE approved. Class I Div 2 Groups A, B, C, D approved

Universal AC input full range, Installation on DIN rail 7.5 or 15mm, Short circuit protection, Overload protection, Class 2 Output, High efficiency, LED indicator for DC power ON, Power Ok output, CE, TUV approved and cULus Listed.

Lovato HRA101CE024 - Slim Electromechanical Relay Assembled on the Socket - 24VAC/DC - 6A - 1 Contact - Screw Terminals

Miniature Relay with LED Status Indicator and Mechanical Test Actuator, 24Vac Coil, 2 Changeover Contacts, with Socket the Maximum Current is 8A. Socket Model# HR5XS22. Socket need to be Purchased Separately.

Miniature Relay with LED Status Indicator and Mechanical Test Actuator, 12Vdc Coil, 1 Changeover Contact, 16A Rated if the Relay Soldered Directly onto the Board, with Socket the Maximum Current is 10A. Socket Model# HR5XS22. Socket need to be Purchased Separately.

Miniature Relay with LED Status Indicator and Mechanical Test Actuator, 24Vac Coil, 1 Changeover Contact, 16A Rated if the Relay Soldered Directly onto the Board, with Socket the Maximum Current is 10A. Socket Model# HR5XS22. Socket need to be Purchased Separately.