ONSALE

Carlo Gavazzi Multifunction Timer DMB51CM24, Operates on 24VDC and 24 to 240VAC, Mini-D Compact Housing, Snaps Directly to DIN Rail. 5Amp SPDT contact Output, Timing Ranges from 0.1 second to 100 hours. Split into 7 Sub-ranges.

Timing ranges: 0.5 seconds to 300 hours. 12 to 240 VAC/DC supply voltage. Knob selection of timing range and timing function. 8 Amp DPDT contact output. 48 x 48mm housing for front panel or socket mounting. LED indication for replay status and power supply “ON”.

Socket ZPD8XA is required but not included (See Industrial Relays & Bases Flyer) 

Timing ranges: 0.5 seconds to 300 hours. 12 to 240 VAC/DC supply voltage. Knob selection of timing range and delay type. 8 Amp DPDT contact output. 48 x 48mm housing for front panel or socket mounting. LED indication for replay status and power supply “ON”.

Socket ZPD11XA is required but not included (See Industrial Relays & Bases Flyer) 

Each Pole Full Load 40Amp 690VAC Maximum, Total 4 Poles Normally Open (NO), Control Coil 120Vac, without Auxiliary Contact, Super Quiet Operation, Solid Quailty, Best Value in the 4 Pole 40Amp Contactor Market.

Lovato HRA101CE024 - Slim Electromechanical Relay Assembled on the Socket - 24VAC/DC - 6A - 1 Contact - Screw Terminals

Miniature Relay with LED Status Indicator and Mechanical Test Actuator, 24Vac Coil, 1 Changeover Contact, 16A Rated if the Relay Soldered Directly onto the Board, with Socket the Maximum Current is 10A. Socket Model# HR5XS22. Socket need to be Purchased Separately.

Miniature Relay with LED Status Indicator and Mechanical Test Actuator, 12Vdc Coil, 1 Changeover Contact, 16A Rated if the Relay Soldered Directly onto the Board, with Socket the Maximum Current is 10A. Socket Model# HR5XS22. Socket need to be Purchased Separately.

Miniature Relay with LED Status Indicator and Mechanical Test Actuator, 24Vac Coil, 2 Changeover Contacts, with Socket the Maximum Current is 8A. Socket Model# HR5XS22. Socket need to be Purchased Separately.

8-Pin Industrial Relay with LED Status Indicator and Mechanical Test Actuator, 230Vac Coil, 2 Changeover Contacts, Maximum 10A. Socket Model# HR7XS1. Socket need to be Purchased Separately.

8-Pin Industrial Relay with LED Status Indicator and Mechanical Test Actuator, 24Vdc Coil, 2 Changeover Contacts, Maximum 10A. Socket Model# HR7XS1. Socket need to be Purchased Separately.