Skip to Main Content »

Search Site
Your shopping cart is empty

All Prices are in Canadian Dollars

OUELLET OWC-M0700 - Heating Cable For Concrete On Mat - 700 Watts - 240/208 Volts - 1-Phase - 65.5 sq. ft. - 11W/sq. ft.

Be the first to review this product

100% energy efficient, the concrete heating cables from Ouellet are also faster and more economical to install than a hydronic system. They require no annual maintenance and provide quiet and clean heat without any liquid or pump.Furthermore, our heating cables for concrete allow for zoning so each room can be separately controlled.Designed for installation with or without metallic structure for reinforced concrete, our heating cables for concrete on mat are solely for interior applications.

 

Availability: In stock

$324.00

OUELLET OWC-M0700 - Heating Cable For Concrete On Mat - 700 Watts - 240/208 Volts - 1-Phase - 65.5 sq. ft. - 11W/sq. ft.

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Additional Information

Brochures & Specific Sheets


Stock Code OWC-M0700
Brand OUELLET
UPC 625262437656
Phase Single Phase
Voltage (V) 240/208V
Coverage (sq.ft.) 61-70
Amperage 2.920 Amp. @240V
Operates Basement, Garage, Bathroom, Kitchen, Family room, Workshop, Pool, Shower, Entrance Way, Hospital, Hotel, Factory, Business, Restaurant, Sunroom, Greenhouse, Buildings Used For Housing Animals.
Heat Cable Power Rate 11W/SQ.FT
Wattage (w) 700 Watts
UL Listed cSAus
Warranty 20-Year Warranty On The Heating Cable

Features

Cold lead length
• 8’ 2’’ (2.5 m) cold lead included.

Control
• Two types of control method possible (see instruction manual
for details):
- Surface heating control with electronic thermostat in floor mode (F) and temperature sensor.
- Ambient heating control with electronic thermostat in ambient mode with floor limit (A or AF) and temperature sensor.
Note: A ground fault circuit interrupter (GFCI) must be used with this heating device unless exempted by the applicable national and/or local electrical code for the area of installation.

Included materials
• 15' (4.6 m) temperature sensor.
• Measurements table label (to be placed in electrical panel).

Installation
• Never cut or shorten the heating cable.
• For indoor applications only, residential or commercial.
• Installs under a 4" to 6" (10 cm to 15 cm) concrete slab or under a 1.5’’ to 4’’ concrete topping (4 cm to 10 cm).
Note: It’s highly recommended to insulate the concrete slab in order to avoid heat loss from below (see instruction manual for all installation details).
• Compatible with most floor coverings(check with the dealer or manufacturer).

Warranty
• 20-year warranty on the heating cable.

Application
• Basement, garage, bathroom, kitchen, family room, workshop, pool,shower, entrance way, hospital, hotel, factory, business, restaurant,sunroom, greenhouse, buildings used for housing animals.

Voltage
• 240/208V, 347V, 1-phase.

Construction
• Twin conductor heating cable attached to a plastic mat with negligible magnetic field.

Watt density
• 11W/sq. ft. (120W/sq. m), factory installed on mat at 6’’ (15 cm) spacing.

Dimension
• 24’’ (0.6 m) wide mat available in several lengths.

Included materials
• Plastic floor fasteners (KIT-OW-CLP).

Installation
• Installation with or without metallic structure for reinforced concrete.


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.