Skip to Main Content »

Search Site
Your shopping cart is empty

All Prices are in Canadian Dollars

Lovato P1MB1PB63 - MINIATURE CIRCUIT BREAKER - 1P - 10KA. 1 MODULE - CHARACTERISTIC B - 63A

Be the first to review this product

Lovato P1MB1PB63 - MINIATURE CIRCUIT BREAKER - 1P - 10KA. 1 MODULE - CHARACTERISTIC B - 63A

 

Availability: In stock

$35.35

Lovato P1MB1PB63 - MINIATURE CIRCUIT BREAKER - 1P - 10KA. 1 MODULE - CHARACTERISTIC B - 63A

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Additional Information

Brochures & Specific Sheets


Stock Code P1MB1PB63
Brand Lovato
UPC 8013975202814
Amperage 63A
Amp Rating 63A
Wattage (w)
UL Listed EAC, cURus , TÜV-Rheinland
Notes HS Code: 85362010
Cross Refefence Conformity:
IEC/EN 60898-1
IEC/EN 60947-2
UL 1077
CSA C22.2 n°235. UR “UL Recognized” per Canada e USA.

General characteristics

These devices are used to protect against short circuits and overloads of wiring installations and loads in panel boards, office buildings, stores and similar applications. Their purpose is circuit protection, circuit isolation and load operation controls. They have instantaneous trip characteristics defined as follows:
– B-curve: instantaneous trip 3…5 times In for non-inductive or low inductive loads (heating resistors, generators, very long wire lines)
– C-curve: instantaneous trip 5…10 times In for inductive loads (mixed and inductive resistive loads with low inrush current)
– D-curve: instantaneous trip 10…14 times In for highly inductive loads (loads with high inrush and current such as motors).
Main features include:
– IEC rated current In: 1…63A
– Pole width: 17.5mm / 0.69”
– Contact status with flag indicator
– Trip characteristic: Curve type B, C and D
– Auxiliary contacts and trip releases mounted on MCB left side
– Fixing on 35mm DIN rail (IEC/EN 60715).

Operational characteristics

– Dissipation per pole: 3…13W
– IEC rated insulation voltage Ui: 440V
– IEC rated impulse voltage Uimp: 4kV
– IEC rated operational voltage Ue: 230/400VAC.

Certifications and compliance

Certifications obtained: TÜV – Rheinland; UL Recognized for USA and Canada (cURus – File E359585) as “Supplementary Protectors”, designated as Overcurrent type, for general industrial use, suitable for factory wiring only with 125-135% tripping current of amp rating. Products having this type of marking are intended for use as components of complete workshop- assembled equipment.
Compliant with standards: IEC/EN 60898-1, IEC/EN 60947-2, UL 1077, CSA C22.2 n°235.


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.