Additional Information
Brochures & Specific Sheets
Stock Code | P4010ACSCO-CA |
---|---|
Brand | Kidde |
Family | CO/Smoke Combination Alarms |
Part No | 21027905 |
UPC | 0-47871-27905-7 |
Voltage (V) | 120VAC, 60Hz |
Amperage | 45mA |
Width (in) | 5.5 (Diameter) |
Depth (in.) | 1.75 |
Battery Back Up | Yes |
Battery Type: | Worry-Free 10 Year Sealed Lithium Battery |
Operates | 120V Interconnecting –Will interconnect with up to 24 other devices (18 of which can be initiating), including smoke alarms (limit of 12), CO and heat alarms. |
Start Temp. (Min) | 40ºF (4.4ºC) |
Start Temp. (Max) | 100ºF (37.8ºC) |
UL Listed | CSA, UL listed |
Warranty | 10 Years Limited |
Cross Refefence | Kidde i12010S-CO, i12010S-CO-CA, 120V Hardwire Combo Smoke & Carbon Monoxide (CO) Alarm with Worry-Free 10 Year Sealed Lithium Battery Backup Kidde UPC 047871106080 |
Worry-Free AC Wire-in Combination Smoke & Carbon Monoxide (CO) Alarm Sealed Lithium Battery Backup
Model# i12010SCO
Features and Benefits
- Sealed-In Lithium Battery Backup – no battery replacement required over the 10 year life of the alarm. Eliminates worry about removal or unauthorized deactivation of alarm.
- Voice Warning System – Verbally announces “FIRE!” or “WARNING! CARBON MONOXIDE” to help distinguish between threats.
- Smart Interconnect – Interconnects up to 24 Kidde devices (of which 18 can be initiating)
- Hush Feature – Temporarily silences nuisance alarms for approximately 9 minutes and will not allow hush mode unless the unit is in alarm mode.
- Peak Level Memory – Announces “CARBON MONOXIDE PREVIOUSLY DETECTED” if alarm has detected CO level of 100ppm or higher since it was last reset.
- Ionization Sensing Technology – Ideal for detecting fast flaming and other types of fires.
- Green LED – Illuminates to indicate the unit is receiving AC power. Flashes once every 60 seconds to indicate battery only mode. Flashes once per second during alarm to indicate initiating alarm. Flashes once every 16 seconds to indicate smoke or CO previously detected. Flashes every 2 seconds while the alarm is in HUSH mode.
- Red LED – When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chrip every 30 seconds..