Home »
RAB Design FW4-2T8-120/277V UNI - Wet Location Fluorescent - 2 x 32W - 120 - 277 Volt

RAB Design FW4-2T8-120/277V UNI - Wet Location Fluorescent - 2 x 32W - 120 - 277 Volt

Be the first to review this product

RAB Design - Wet Location Fluorescent - 2 x 32W T8 - 120 - 277 Volt - Electronic Ballast

Availability: In stock

$105.88

Qty:

RAB Design FW4-2T8-120/277V UNI - Wet Location Fluorescent - 2 x 32W - 120 - 277 Volt

Double click on above image to view full picture

More Views

Additional Information

Brochures & Specific Sheets

FW4T8-spec-sheet.pdf

Stock Code	RAB Design_FW4-2T8-120/277V UNI
Brand	Rab Design
Part No	FW4-2T8-120/277V UNI
Voltage (V)	120 - 277 Volt
Wattage (w)	32 Watt
Bulb Type	Fluorescent Lamps
Ballast Type:	Electronic Ballast
Housing	Polycarbonate, UV stabilized. Conduit entries at either end.
IP Rating	IP65
Reflector Type:	Specular aluminum reflector and is tethered to the housing for ease of installation.
Lens:	Polycarbonate, UV stabilized, and is retained to the housing with ten clips.
UPC	061184980502
UL Listed	cULus
Notes	For additional options and special quantity discounts, please contact our sales department 1-(855)-296-9508 x 101 or send email to cs@bulbspro.com

FW4-2T8 WET LOCATION FLUORESCENT

The FW4 fluorescent fixture is designed for rough service and wet location applications. The FW4 has a low profile 3-3/4” (10cm) polycarbonate enclosure and lens, which is vandal resistant and UV stabilized. All hardware is rust proof. Ideal for tunnels, canopies, shipping docks, refrigerated areas or any non-hazardous environment that requires a wet location listing. Each unit is shipped with spare lens clips. Every box has a template for ease of marking for a faster installation. Also available in a 2 foot version T8 please see FW2-2T8. For a 4 foot version in T5 please see FW4-2T5.

HOUSING Polycarbonate, UV stabilized. Conduit entries at either end.

LENS Polycarbonate, UV stabilized, and is retained to the housing with ten clips.

REFLECTOR Specular aluminum reflector and is tethered to the housing for ease of installation.

BALLAST Electronic instant start 120/277, 347 ballast for 2 T8 lamps. Ballast has quick disconnects for ease of ballast replacement.

INSTALLATION For ceiling, surface or pendant mounting.

HARDWARE All hardware is rust proof.

LAMPS Not included.

OPTIONS Stainless steel clips, shipped separately.

RATING IP65

APPROVAL cULus

Lithonia Lighting DMW 2 48T8HO MVOLT GEB10IS - Fiberglass Housing - Wet Location - 2 Lamps - 44W T8HO(48") - 2-1/4" Deep High-impact Acrylic (50% DR) - 120-277V - Electronic Ballast - ≤10% THD - Instant Start $308.13	TCP PL4WA632UNIL - 4’ Polar Bay - 6 Lamp - 32 Watt - 120-277 Volt - T8 Low Ballast Factor - White Channel Cover $187.02	TCP PL4WA632347H - 4’ Polar Bay - Wide Distribution - 6 Lamp - T8 - 32W - T8 High $462.30	TCP PL4WA432UNIL - 4’ Polar Bay - 4 Lamp - 32 Watt - 120-277 Volt - T8 Low Ballast Factor - White Channel Cover $173.30
RAB Design FW4-2T8-347V - Wet Location Fluorescent - 2 x 32W - 347 Volt $157.24	TCP WL8WA232UNIN - 8’ Wet Location - 2 Lamps - 32 Watt - T8 Normal Ballast Factor - 120-277 Volt - White Channel Cover $179.55	Lithonia Lighting TDMW 2 32 MVOLT 1/4 GEB10IS - Tandem Fiberglass Housing Wet Location - Enclosed - 2 Lamps - 32W T8(48") - 2-1/4" Deep High-impact Acrylic (50% DR) - 120-277V - One 4-lamp Ballast - Electronic Ballast - ≤10% THD - Instant Start $360.64	Stanpro VT4F2T8032-W - 4’ Wet and damp location - 2 Lamps - 32 Watt - T8 - 120-277 Volt $261.24 As low as: $180.24

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.