Additional Information
Stock Code | RAB Design_MS180DIM-BRZ |
---|---|
Brand | Rab Design |
Part No | MS180DIM-BRZ |
Voltage (V) | 120 - 277 Volt |
Wattage (w) | 400 Watt |
Beam Angle | 180 Degree |
Finish | Bronze |
IP Rating | IP65 |
UPC | 061184870056 |
Start Temp. (Min) | -40°C |
Start Temp. (Max) | 40°C |
UL Listed | cCSAus |
Warranty | 5 Years |
Notes | For additional options and special quantity discounts, please contact our sales department 1-(855)-296-9508 x 101 or send email to cs@bulbspro.com |
MS180DIM
0 - 10V Dimmable Smart Sensor
The MS180DIM is a fully adjustable, dimmable smart sensor that allows you to provide reduced light levels as low as 10% when no activity is detected.
APPLICATIONS
The MS180DIM is compatable with any fixture that has a 0 – 10V dimmable driver. Ideal for use on building perimeters and entrances.
SPECIFICATIONS
Construction
Durable polycarbonate construction. An adjustable aluminum extension arm is included with the sensor. The arm has two joints that are connected by screws and rotate 180° along the vertical axis. It can be detached from the sensor when not required.
Electrical
The sensor consumes negligible power and has a load rating of 400W. The unit has surge supression of 4kV.
Mounting
Standard unit comes with 1/2” NPS threaded arm that fits on all standard boxes, covers and fixture knockouts. Fixture can be mounted from the bottom or side conduit access. Ensure sensor faces downward toward detection range.
Load rating
400W
Voltage
120 - 277V
Surge suppression
4kV
Detection range
180°
Detection method
Passive infrared Sensor
Sensor range
50 feet X 180° at 8 feet mounting height
Time adjustment
5 secs to 30 minutes
Dimming adjustment
10% - 100%
Daylight Adjustment
Fully adjustable for 24 hour operation or custom applications