RAB Design RD-L1-16-W-M-1000mm - LED Linear Lighting - 16 Watt - White - Medium Optics - 1000mm Lengths Available

RD-L1 - LED LINEAR LIGHTING

LED’s offer long life, low energy consumption and reduced maintenance costs. The RD-L1 is a linear LED fixture for mounting on walls, ceilings or ground, either indoors or outdoors. This unit is available in three lengths 11.83” (300mm) with 4 LED’s, 19.7“(500mm) with 8 LED’s and 39.35” (1000mm) with 16 LED’s. It measure 54mm (2.13“)wide and 70mm (2.74”)in depth. Available with narrow, medium or wide optic system. The RD-L1 system is great for illuminating walls, architectural detail, or for adding colour to a building’s interior or exterior. The LED’s are rated for 50,000 hours.

HOUSING Extruded aluminum with an etched anodized finish.

END CAPS Die cast aluminum, painted silver and held in place with four stainless steel screws. Sealed with silicone gaskets.

LENS 4mm clear tempered glass with a shaded border. Silicone gasket in place.

ELECTRICAL FITTING 3/8” water tight metal fitting with a chrome finish.

DRIVER The driver is integral and has an inherent short circuit protection. Driver is rated for operating down to -40°C.

LED’s Each LED is 1 watt made by LUXEON. LED’s are available in white, blue, cyan, green, amber or red. LED’s are rated for 50,000 hours.

OPTICS Available with narrow, medium or wide optics.

RATING IP65

LENGTHS AVAILABLE 300mm, 500mm and 1000mm.