Additional Information
Brochures & Specific Sheets
| Stock Code | S142BRNT230 |
|---|---|
| Brand | Carlo Gavazzi |
| Family | Photoelectric Sensors |
| Voltage (V) | 195 to 265 VAC, 45 to 65 Hz |
| Sensor Sensing | Amplifier with Timer |
| Sensor Output | NPN |
| Sensor Switching | Switch Selectable |
| Sensor Connection | 11-pin circular plug |
| Width (in) | 35 mm |
| Height (in) | 80 mm |
| Depth (in.) | 81.5 mm |
| IP Rating | IP20 |
| Sold Separately: | 11 pole circular socket ZPD11, Holding down spring HF, Mounting rack SM13, Front panel mounting bezel FRS2 |
| Start Temp. (Min) | -20°C |
| Start Temp. (Max) | 50°C |
| UL Listed | UL508, UL325*, CSA,CE |
μ-processor controlled amplifier for one set of photoelectric through beam sensors, type MOF.., MMF.. and MNF.Utilizes an 11-pin circular plug for easy connection.8 A SPDT relay output, NPN/ PNP transistor output or alarm output. Diagnostics for sensor test during operation.Alignment help via LED or alternation of alarm output. Level indication for dirt accumulation. Manual or automatic emitter power regulation.Two emitter codes available for high neighbour immunity. ON- or OFF delay adjustable up to 10 sec.
$168.00
|
$161.00
|
$85.00
|
$370.00
|
$165.00
|
$172.00
|
$257.00
|
$513.00
|
