Control Panels & Input Devices & Signalling Devices

Accessories add functionality to the duct smoke detection system by allowing quick, convienient inspections at eye level and effective audible and visual notification options

Replacement air filter

Approved for indoor & outdoor use - Low current draw - High dB output - 8" diameter - 24 VDC Operating

White or plastic housing - Weatherproof NEMA 4X (IP56) case - Field-selectable candela settings - Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela - Rotary switch for horn tone and three volume selections

12 and 24 volt operation - High and low volume settings - Temporal and non-temporal tones - Mounts to single gang back box - Compatible with MDLsync module - Ceiling or wall mounting - 1W LED Flashlight - Red warning light -  Strong, pivoting magnetic base - 100,000 hour LED life - Fold-away, swivel hook - 32°F to 120°F (0°C to 49°C) Operating

The DUCTSD 4-wire photoelectric duct smoke detector features a pivoting housing that fi ts both square and rectangular footprints and mounts to round or rectangular ductwork - Cover integrated smoke test port - High contrast terminal designations - Built-in short circuit protection from wiring errors - -4°F to 158°F (-20°C to 70°C) Operating

The most versitile and easy-to-use horn/strobe in the industry - Universal mounting plate - Rotary switch for horn tone and volume - Field selectable Candela settings - Selectable 12V or 24V operation - Tamper resistant construction - Plug-in design

Exhaust tube for ducts

Epoxy encapsulated multi-voltage relays, single pole double throw that use a red LED as a visible indication of relay coil energization - Mounting track and hardware - Reliable and robust design - Easy and flexible installaion

Accessory magnet for testing sensor head

Replacement dust filte

Power board component for D4120 & D4120W

Remote annunciators are designed for both conventional and intelligent applications. Red LED provides visual indication of alarm condition

RTS151 remote test station is automatic fire detector accessory designed to test duct smoke detectors from a convenient location - 2.8 to 32 VDC, 12mA max. Alarm Power - 10VA @ 32 VDC Test/Reset Switches

RTS151KEY remote test station is automatic fire detector accessory designed to test duct smoke detectors from a convenient location - 2.8 to 32 VDC, 12mA max. Red - 14 to 35 VDC, 12mA max. Green

Edwards 5604A - Heat Detector - Single circuit heat detectors - Fixed Temperature 194°F (90°C)

Edwards 5603A - Heat Detector - Single circuit heat detectors - Fixed Temperature 135°F (57°C)

Mini Stopper - Indoor Use - No horn - c/w spacer - Clear cover for surface mounted stations 7.7" H x 5.5" W x 4.25" D - English marking

Mini Stopper - Indoor Use - No horn - Clear cover for flush mounted stations 7.7" H x 5.5" W x 2.25" D - English marking