Additional Information
| Stock Code | SCM530C6W |
|---|---|
| Brand | Techspan |
| UPC | 77685633166 |
| Amperage | 30A |
| Amp Rating | 30A |
| Wattage (w) | 5W |
| Pole | (4P) Four Pole |
| Color | Red |
| IP Rating | IP67 |
| Start Temp. (Min) | -25°C |
| Start Temp. (Max) | +40°C |
| UL Listed | UL |
| Notes | For additional options and special quantity discounts, please contact our sales department 1-(855)-296-9508 x 101 or send email to cs@bulbspro.com |
SNAP-ON Spring: Stainless Steel
Mounting Flanges: VALOX®
Terminal Screws: Nickel plated steel
Flap/Screw CoverSprings: Stainless Steel
Sleeve Force Ring: Zinc plated steel
Pin & Sleeves: Nickel plated brass
O-Ring, Seals & Gaskets: Solid neoprene
Cable Bushing: Solid neoprene, onion ring type
Cable Gland Nut: VALOX®
Contact Carriers: VALOX®
Housing: VALOX®
Corrosion Resistance: All metallic components stainless steel or nickel plated brass. Sleeve pressure rings of zinc plated steel
Terminal Identification: In accordance with UL 1682 standards and IEC 60390-1 as 3P+N+E - L1-L2-L3-N-G
Cable Pull-Out Force: Per UL 1682 Section 33 and IEC 60309-1 Clause 23
Cable O.D. Accomodation: Round portable service cord from 0.57" O.D. through 1.79 O.D.
Cord Grip Range Min awg Max mm2: 23
Cold (-25C) Impact Resistance: Per UL 1682 Section 34 and IEC 60309-1 Clause 24
Type (Watertight IP67) / SplashProof (IP44): IP67
Pin and Sleeve Rated Voltage: 220/380 240-415
Colour Coding: Red
Clock Position: 6h
Poles & Wires: 4P 5W
Series I (INT)/ Series II (NA): II
Wiring and Installation Rated Current: 30A/32A *
Wiring and Installation Min awg: 14
Wiring and Installation Min mm2: 2.5
Wiring and Installation Max awg: 10
Wiring and Installation Max mm2: 6
Cord Grip Range Min awg Min mm2: 17
Cord Grip Range Min awg Max awg: 0.91
Cord Grip Range Min awg: 0.675
Rated Current: 30A
Material:VALOX®
Per IEC 60309-1 Clause 21:30 Amp: 1000 cycles, 60 Amp: 1000 cycles: 100 Amp: 250 cycles (Alternating load)
Endurance with Load: 20 Amp: 500 cycles: Load only
Current Interrrupting/Load breaking: Tested to 150% of full rated current for circuit interrupting
Rated Voltage: 110 - 130 V~
Dielectric voltage withstand: 3000 Volts for 1 minute (fixed devices), 2200 Volts for 1 minute (portable devices)
IK degree at 20 (EN 50102): IK10 (20J)
Max Working Voltage: 600 VAC/250 VDC(minimum creepage and clearances per UL 840)
Self-extinguishing (UL94): V1 (3mm)
Self-extinguishing (IEC 60695-2-I): GW test 650°C /850°C
Operating Ambient Temperature: -25°C + 40°C
Protection degree (IEC 60529): IP67
Insulating Voltage: 500/690V~
Frequency: D.C. - 50÷500Hz
$222.16
|
$416.06
|
$304.10
|
$563.68
|
$186.78
|
$92.47
|
$205.52
|
$456.96
|
