Tools

The impact socket adapter allows you to use various socket wrench sizes with a 1/4 in. quick change impact driver.

These high quality hex key allen bits are 6″ long for increased versatility. Also included in the kit is a 3/8″ socket adapter.

The 1/4″ shank allows you to use any standard drill or quick change chuck.

Kit Includes:

– 3/16″ x 6″ Bit

– 7/32″ x 6″ Bit

– 1/4″ x 6″ Bit

– 5/16″ x 6″ Bit

– 3/8″ x 6″ Bit

– 3/8″ Socket Adapter

Ideal Industries 35-818, Auger Extension for 5/16", Hex

Ideal Industries 35-819, Auger Extension for 7/16", Hex

With the same great design as our double-ended square/Phillips impact bits comes the double ended T20 and T25 Torx bit. With a specifically designed head, this bit works with any standard quick change chuck.

With the same great design as our double-ended square/Phillips impact bits comes the double ended T20 and T25 Torx bit. With a specifically designed head, this bit works with any standard quick change chuck.

The 5 key driver bits and 2 drill tapping bits you need when finishing a house or condo. Includes: 4'' – #2 Phillips/#2 Robertson Double-Ended Impact; 4'' – #1 Robertson; 4'' – #1 Phillips; 6'' – Robertson Square; 6'' – #2 Phillips; 6-32 Tapping Bits; 8-32 Tapping Bits

The 7 key Racky driver bits you need when roughing in a house or condo. Includes: 4” – #1 Green/#2 Red Robertson Square Double-Ended Impact; 6” – #1 Green /#2 Red Robertson Square Double-Ended Impact; 4” – #2 Blue Phillips/#2 Red Robertson Square Double-Ended Impact; 6” – #2 Blue Phillips/#2 Red Robertson Square Double-Ended Impact; 6” – #1 Green Robertson Square; 6” – #2 Red Robertson Square; 4” – #3 Black Robertson Square

The Reemer bit is a 3 in 1 bit that will come especially handy when working with EMT. Ream your pipe and tighten your couplings and connectors with the same tool. The sharp edges on the bit will do the reaming but not cut up your fingers!

Ideal Industries 35-955 - 4-Piece Extendable Blade Set

Rack-A-Tiers 91720 - Enlarge an existing hole while keeping the hole saw centred - Versatile fit works with all arbours - Can be used for wood, plastic, and drywall (limitations set by hole saw) - Small enough to fit in most hole saw kits - Accompany with the dust bowl for a mess free result

Rack-A-Tiers AW5818T - Tri-Cut Auger Bit - 18" x 5/8"

Designed to fit between wall studs when used with common drills - Eliminates the need for expensive right angle drills

Designed to fit between wall studs when used with common drills - Eliminates the need for expensive right angle drills

Designed to fit between wall studs when used with common drills - Eliminates the need for expensive right angle drills